Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Wabtec Manuals
  4. Controller
  5. Ricon 55914
  6. Installation instructions

Wabtec Ricon 55914 Installation Instructions

For s/k series lifts – pcb ri55664
Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
Read and understand supplemental instructions completely before any work is attempted. Refer to the
Service/Owner Manual for additional safety precautions.
Check contents of this kit and notify Ricon immediately of any missing parts. Claims for damages that have occurred
during shipping must be made to the shipper.

TABLE OF CONTENTS

I. PARTS LIST .................................................................................................................................................................... 1
II. TOOLS REQUIRED ......................................................................................................................................................... 1
III. INTRODUCTION ............................................................................................................................................................. 2
A. REMOVE FACTORY PCB ........................................................................................................................................ 2
IV. INSTALLATION OF KIT #55914 ..................................................................................................................................... 2
A. INSTALLATION OF PCB ASSEMBLY ...................................................................................................................... 2
B. INSTALLATION OF EXTENSION HARNESS, J2 .................................................................................................... 4
C. FINAL INSTALLATION ............................................................................................................................................. 5
Under no circumstances is maintenance, repair, or adjustment of the R2000 Power Seat Base to be performed
without the presence of an individual capable of giving aid.
Give immediate attention to all injuries, and administer first-aid, or seek medical attention as necessary.
Protective eye shields and clothing should be worn during maintenance, repair, and adjustment of the R2000 Power
Seat Base.
Work in a properly ventilated area.
Check for hidden obstructions before drilling and cutting. Avoid interference with wiring, fuel tank, fuel lines, hydraulic
lines, subfloor members, etc.
Read and understand all instructions before attempting to operate the S/K Series Lift.
Read and understand all instructions before attempting to perform maintenance, repairs, or adjustments to the S/K
Series Lift.
Read and comply with warning labels attached to the S/K Series Lift.
I.

PARTS LIST

55664, PC BOARD ASSY. w/TWS,FOUR SENSORS
55913, HARNESS, JUMPER, EXTENSION
II.

TOOLS REQUIRED

PHILLIPS SCREW DRIVER
WIRE CUTTER
WIRE STRIPPER
WIRE CRIMPER
3/8" DRIVE RATCHET HANDLE
9/16" SOCKET, 3/8" DRIVE
1/2" SOCKET, 3/8" DRIVE
08/10/14
INSTALLATION INSTRUCTIONS, KIT #55914
S/K SERIES LIFTS - PCB RI55664
32II470e.B
PAGE
1 of 5

Advertisement

loading

Summary of Contents for Wabtec Ricon 55914

  • Page 1: Table Of Contents

    INSTALLATION INSTRUCTIONS, KIT #55914 S/K SERIES LIFTS – PCB RI55664  Read and understand supplemental instructions completely before any work is attempted. Refer to the Service/Owner Manual for additional safety precautions.  Check contents of this kit and notify Ricon immediately of any missing parts. Claims for damages that have occurred during shipping must be made to the shipper.

  • Page 2: Introduction

    III. INTRODUCTION The purpose of this document is to outline the step by step procedure for the installation of Kit #55914 for PCB RI55664 and Extension Harness RI55913 (if needed) for the S/K Series Lifts. Follow all safety precautions before attempting to perform installation or maintenance of the S/K Series Lift.
  • Page 3 LEFT RIGHT SET 1 RX (GREEN) TX (RED) SET 3 (If Applicable) SET 2                                         FIGURE 3: TWS SENSOR SET IDENTIFICATION 4. Install Terminal T1-T4 in the correct PCB location. Refer to Figures 4-5. FIGURE 4: PREVIOUS TERMINAL ORIENTATION 08/10/14 32II470e.B 3 of 5...

  • Page 4: Installation Of Extension Harness, J2

    FIGURE 5: NEW TERMINAL ORIENTATION 4. Install remaining electrical connections to PCB. B. INSTALLATION OF EXTENSION HARNESS, J2 Note: Depending on the lift application, the J2 connector harness may or may not need to be extended. If upon installing PCB assembly RI55664 the harness does not reach connector J2, proceed with section B. Otherwise, continue to section C.

  • Page 5: Final Installation

    FIGURES 7A/7B: HARNESS EXTENSION INSTALLATION (REFERENCE ONLY) C. FINAL INSTALLATION 1. Re-install the pump assembly to the lift; reconnect hydraulic lines and electrical connections if applicable. 2. Re-install the pump cover, making sure to plug the warning light if installed. 08/10/14 32II470e.B 5 of 5...