Remote Control - VIORE LED22VF50 Operating Instructions Manual

1
23
YPbPr CC
24
DTV
21
TV
STRENGTH
22
16
CH LIST EPG
17
3
4
5
6
7
2
Insert Batteries Into the Remote Control
1 2
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the
polarity (+ or -) of the batteries matches the polarity
marks inside the unit.
3. Mount the battery cover.
Replace with new batteries when the TV set begins
to show the following symptoms:
Operation is unsteady or erratic. Sometimes the TV
set does not function with Remote Control Unit.
Remark:
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the
remote control is not to be used for long time.
9
27
25
MTS VGA
26
19
AV HDMI
20
FAV
15
18
8
11
12
TV
DISPLAY
13
S.M
14
P.M
10
3
1: POWER
To set the TV standby or on.
2: NUMBER KEY
For direct access to program.
3:
Displays the main on-screen menu.
4: CURSOR
To move within the menu.
5: EXIT
Used to exit menu.
6: VOL+/-
To adjust sound level.
7: P.M
To switch picture mode.
8:
Press to display and select the available video sources.
9: MUTE
To disable or enable the sound.
10: RECALL
To access the previously viewed program.
11: ENTER
Confirms selection.
12: TV DISPLAY
Displays/removes the program Information
13: S.M
To switch sound mode.
14: CH+/CH-
To access the next or previous Program.
15: ASPECT
To change picture aspect .
16: CH LIST
Used to display the channel list.
17: EPG
Display all the information of DTV programs.
18: FAV
Used to access your favourite channels in digital TV mode.
19: HDMI
Hot key directly go to HDMI source.
20: AV
Hot key directly go to AV source.
21: DTV STRENGTH
Used to display the DTV signal strength menu.
22: TV
Hot key directly go to TV source.
23: YPbPr
Hot key directly go to YPbPr source.
24: CC
Enable or disable the CC function.
25: VGA
Hot key directly go to VGA source.
26: MTS
Switch the sound stereo.
27: COLOR KEYS
Reserved keys
-10-

REMOTE CONTROL