Contents Contents Caution Safety Information Unit and Accessories Product Feature Introduction 1. Front View 2. Rear View 3. Remote Control Connection 9-11 Basic Operation 12-13 OSD Menu 14-20 1. Picture menu 2. Audio menu 3. Time menu 4. Setup menu 5.
Unit and Accessories and Product Feature Unit and Accessories TV set INPUT -/-- PICTURE SOUND SLEEP DISPLAY VOL+ MUTE VOL- EXIT MENU User's manual Remote control Mains adaptor Mains cable Batteries: 2xAAA Product Feature • 21.6” (measured diagonally) wide screen for a complete home theater experience •...
Introduction Introduction 1. Front View MENU CH- CH+ VOL- VOL+ INPUT POWER Led Indicator Remote Control window (Keep clear) 1. (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press POWER to turn on and off. Indicator on(Red) Standby mode Indicator on(Green)
Introduction 2. Rear View 1. POWER: Connect to the mains adaptor. 2. USB: For update the soft. 3. HDMI1/2: Connect it to the HDMI of DVD or other equipment. 4. VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC. 5.
Introduction 3. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. POWER(red button): Turn the TV on/standby. INPUT INPUT: Press to display the input source menu.
Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don’t mix different types or used batteries with new ones. 3.
Connection Connection Power Cord Connection - Connect to the power supply correctly as shown with the mains cable and mains adaptor. - When you connect the power, the TV set comes into standby mode and the LED indicator (Page 5) lights red. - You could bring the TV out of standby mode by press the POWER remote control(page 7), and the LED indicator lights green.
Page 12
Connection AV Input Connection Note: All cables shown are not included with the TV. RCA Video Cable RCA Audio Cable DVD or VCR - Connect the VIDEO and AUDIO output jacks on the DVD or VCR to the AV IN jacks on the TV set with a RCA cable.
Connection HDMI Connection Note: All cables shown are not included with the TV. HDMI cable DVD or VCR - Connect the HDMI jack on the DVD to the HDMI jack on the TV set with a HDMI cable. - Turn on the DVD, and select “HDMI1/2” in the input source menu. interface that supports uncompressed standard.
Basic Operation Basic Operation Power on/off 1. Connect to the power with a mains cable and an adaptor (page9). 2.-To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select INPUT SOURCE Press INPUT button on the TV set or remote control to display the input...
Basic Operation Basic OSD Menu operation Press MENU button to display the OSD menu as below: Main menu Picture, Audio, Time, Setup, Lock, Channel Submenu (Picture menu for example) Hint you should operate the OSD menu according to the hint. button to select the main menu, and press button to enter the submenu.
OSD Menu OSD Menu 1. Picture menu Description Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture.
OSD Menu 2. Audio menu Flat Description Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity.
OSD Menu 3. Time menu Description Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, or deactivate this function. Time zone: Daylight Saving Time: Select between On and Off.
OSD Menu 4. Setup menu 16:9 PC SETUP Closed Caption Description Menu Language: Select OSD menu language. Transparency: Turn on or off the transparency menu function. Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom. Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle.
OSD Menu 6. Channel menu Description Air/Cable: Allow you to select antenna between Air and Cable. If you selet “Cable”, the following items(Favorite, Show/Hide, Channel NO, Channel Label and DTV Signal) are unable to use. Auto Scan: Enter the Auto Scan menu to start auto scan. If you select “Cable”...
Simple Troubleshooting Simple Troubleshooting No power No picture or sound Poor picture quality No colour TV does not respond to remote control...
Page 24
LCD Panel Panel Size 24 inch (diagonal) Brightness 300 cd/m Contrast 1000:1 1920x1080 Resolution Input Connector Video Audio(L/R) PC Audio HDMI YPbPr Output Connector Coax Headphone Power Source DC 12V 5A Power Consumption * Product specifications and appearance are subject to change without notice.
Page 27
VIORE, Inc. 7801 Hayvenhurst Avenue, Van Nuys, California 91406 Printed in China...