Cisco Aironet 1800i Getting Started Manual page 8

Figure 2 Power-over-Ethernet and USB Ports on the Base
10/100/1000 BASE-T (Ethernet) Uplink
Interface with inline power capability,
Auto-MDIX (automatically support either
straight through or crossover cables), and
1 802.3af/at PoE-In
Figure 3 Reset Button and Kensington Security Lock on the Right Side
1
2
Reset button, on the right side of the AP.
For information on how to use the Reset
button, see "Using the Reset Button" section
1
on page 21.
8
USB port for powering the AP, using 5V, 1.5A
power.
Power the AP using the USB port only when
PoE power is not available.
2
Kensington security lock slot
2