General Operation - Monster MSB3787W Manual

1.Connect the DC 24V,2A Adapter to the DC IN jack on the Unit. Plug the Adapter
into the AC outlet with AC110~240V;50/60Hz. The mode indicator on the Unit
will light up and turn RED.
2. Connect the DC 24V, 2A Adapter to the DC IN jack on the subwoofer. Plug the
Adapter into the AC outlet with AC110~240V;50/60Hz. The power indicator on
the subwoofer will light up and turn RED.
3. Press and hold the Power/Soure button on the unit or press the
remote control to power on the unit. The LED light effect will light up.
Press the STANDBY button on the subwoofer to power on.
4. After a few seconds, the unit will be connected with subwoofer automatically,
the indicator on subwoofer will be solid blue.
IMPORTANT NOTE: If the pairing INDICATOR on the SUBWOOFER is off, it means
the Main Unit is not connected with the SUBWOOFER successfully. Please operate
as the steps below:
A: Press and hold the SB Pair button on the Main Unit for 3-5 seconds.
B: Press and hold the STANDBY button on SUBWOOFER to power off, then press
the STANDBY button on SUBWOOFER
INDICATOR on SUBWOOFER will blink several times and then turn off, it means
the SUBWOOFER is connected with Main Unit successfully.
C: Press the SB PAIR button on the Main Unit
the SUBWOOFER will be solid BLUE.
5. Press the button on remote control or press the Power/Source button on
the unit repeatedly to switch to the desired mode. Or press the AUX, OPTICAL,
USB button on remote control to turn to desired mode, the indicator
, LINE IN,
on front of the unit will turn to:
Blue.............................................................................................Bluetooth Mode
Green.............................................................................................LINE IN Mode
Violet (red+blue)............................................................................AUX IN Mode
Orange (red+green)................................................................OPTICAL IN Mode
Indigo (blue+green).............................................................................USB Mode

GENERAL OPERATION

on e c
12
button on
to power on again, the pairing
the pairing INDICATOR on
again,