Table of Contents
Advertisement
Product Care
Your BISSELL® Multi Hand Vacuum doesn't need much maintenance: keep
the filter clean, check for blockages, remove hair from the Brush Roll, and
charge the battery. Wipe it with a dry cloth if it gets dirty, including the area
under the Dirt Tank. Never wash it with liquid, run it under a tap or use it
without the filter.
Troubleshooting
WARNING
To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting checks.
Problem
Multi Hand
Vacuum
won't
turn ON
Multi Hand
Vacuum
is not
cleaning well
10
global.BISSELL.com
Possible causes
Battery isn't fully charged
Wrong charger being used
Dirt Tank is full
Dirt Tank is not installed
properly
Filters need cleaning
Filters need replacing
Clog or obstruction
Clog or obstruction in Motorized
Brush Roll
Clog or obstruction in Extension
Wand or Crevice Tool
Remedies
Charge battery following
instructions on page 7
Be sure to use only the charger
supplied with your product
Empty Dirt Tank
Position tank correctly and
snap firmly into place
Follow filter cleaning instructions on
page 8
Visit www.global.BISSELL.com to
order replacement filters
Clean the holes in the filter
housing and check for blockages
Remove the Brush Roll to clean and
remove any blockages, see page 6
Look through both ends of the wand
to remove any blockages
Advertisement
Table of Contents
