Bissell MULTI 2169 Series User Manual page 6

Cleaning the Motorized Brush Roll
Make sure the vacuum is OFF. Find
the green ring on the nozzle. Grasp
the green ring and move the ring
towards the direction shown above.
The nozzle will come off.
To clean the Brush Roll, first remove
the Motorized Brush Roll from the
hand vacuum. Rotate the latch from
the lock to the unlock position and
pull the Brush Roll out of the housing.
6
global.BISSELL.com
To attach the Motorized Brush Roll,
slide it into place until the locking
ring clicks back. The power button
will power the brush as well as the
suction.
With the Brush Roll removed, clean
the Brush Roll as necessary. Never
operate the Motorized Brush Roll
without the Brush Roll in place.