Product Care; Troubleshooting - Bissell 1985 SERIES User Manual

Product Care

Your BISSELL Multi doesn't need much maintenance: keep the filter clean,
check for blockages, remove hair from the brushbar and charge the battery.
Wipe it with a dry cloth if it gets dirty, including the area under the bin. Never
wash it with liquid, run it under a tap or use it without the filter.
Trouble Shooting
WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
Problem
Multi
won't turn on
Multi is not
cleaning well
10 www.BISSELL.com
Possible causes
Battery isn't fully charged
Wrong charger being used
Dirt bin is full
Dirt bin is not installed properly
Filters need cleaning
Filters need replacing
Clog or obstruction
Remedies
Charge battery following
instructions on page 7
Be sure to use only the charger
supplied with your product
Empty dirt bin
Position bin correctly and
snap firmly into place
Follow filter cleaning instructions
on page 8
Visit www.bissell.com or
call 1-800-237-7691 to order
replacement filters
Clean the holes in the filter
housing and check for blockages