Contents Introduction ....................... 4 Safety Precaution ................... 5 Installation Instructions.................. 6 Using the Hood....................10 Care and Cleaning ..................12 Technical Data ....................13 Stoves Customer Care ..................14...
Introduction Thank you for buying this high quality hood from Stoves. Our policy is one of constant development and improvement. Strict accuracy of illustrations and specifications is not guaranteed. Modification to design and materials may be necessary subse- quent to publication.
SAFETY PRECAUTION 1. Take care when the cooker hood is operating simultaneously with an open fireplace or burner that depends on the air in the environment. The cooker hood removes the air from the environ- ment which a burner or fireplace needs for combustion. The negative pressure in the environment must not exceed 4Pa (4x10-5 bar).
INSTALLATION INSTRUCTIONS • Assembly and electrical connections must be carried out by specialised personnel. • Wear protective gloves before proceeding with the installation. • Electric Connection: - The appliance has been manufactured as a class II, therefore no earth cable is necessary. The power point must be easily accessible after the installation of the appliance.
Page 6
• Fixing to the wall: Drill 3 holes to accommodate the bracket (Fig.2). Screw and tighten the bracket onto the wall with the screws & screw plugs provided. Lift the cooker hood up and hang it onto the wall bracket hook (Fig.2).
Page 7
• Fixing the decorative telescopic flue: Arrange the electrical power supply within the dimensions of the decorative flue. If your applian- ce is to be installed in the ducting version or in the version with external motor, prepare the air exhaust opening.
Page 8
• Filtering version: Install the hood and the two flues as described in the previous paragraph “ Fixing the decorati- ve telescopic flue”. To assemble the filtering flue refer to the instructions contained in the kit. If the kit is not provided, order it from your dealer as accessory. The filters must be applied to the suction unit positioned inside the hood.
USING THE HOOD LCD Display Fan Symbol: Rotates when the fan is working. When the speed is increased, the fan rotates faster. When the symbol “TURBO” is shown the fan speed is in intensive mode for 5 minutes. Time Display Timer Symbol: Will illuminate when timer function is set.
Page 11
Operation of Hood Speed plus button: To increase the speed of the fan (Level 1,2, 3 & Turbo). Speed decrease button: To decrease the speed of the fan. A short press of the + or – symbols will either increase or decrease the fan speed by one setting. A long press of the + symbol will operate the “Turbo”...
CARE & CLEANING Before cleaning or maintenance switch off the electricity supply. Replacing the LED Lights If the appliance version is with LED lamps, the intervention of a specialised technician is neces- sary to replace them Outer Casing All external parts of the outer casing can be safely cleaned with a clean cloth wrung out in hot soapy water.
TECHNICAL DATA Electricity Supply 230 - 240V ~ 50Hz Classification class II Noise Level (External Venting) Booster 70 dBA Position 3 70 dBA Position 1 49 dB Light Bulbs 2 x 1.5W LED Motor Rating 203W Grease Filters 2 Off - Aluminium panel Note: After cleaning, grease filters may lose their colour slightly - this does not affect their perfor- mance.
Stoves Customer Care Please keep this handbook in a safe place. Please fill in the model number and serial number in the spaces provided below as they will assist us should you need to call. 0344 815 3740 When you dial this number you will hear a recorded message and be given a number of options.
Need help?
Do you have a question about the ST CHIM 600 and is the answer not in the manual?
Questions and answers