IDK FDX-S Series Command Reference Manual
  1. Manuals
  2. Brands
  3. IDK Manuals
  4. Matrix Switcher
  5. FDX-S Series
  6. Command reference manual
IDK FDX-S Series Command Reference Manual

IDK FDX-S Series Command Reference Manual

Modular matrix switcher
Hide thumbs Also See for FDX-S Series:
Table of Contents

Advertisement

Quick Links

Download this manual
⚫
Thank you for choosing our product.
⚫
To ensure the best performance of this product, please read this user guide fully and carefully before
using it and keep this manual together with the product for future reference as needed.
<Command Reference Guide>
IDK Corporation
Modular Matrix Switcher
FDX-S Series
FDX- S16U / S32U
FDX- S16 / S32
Ver.1.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FDX-S Series and is the answer not in the manual?

Questions and answers

Related Manuals for IDK FDX-S Series

Summary of Contents for IDK FDX-S Series

  • Page 1 Modular Matrix Switcher FDX-S Series FDX- S16U / S32U FDX- S16 / S32 <Command Reference Guide> Ver.1.0.0 ⚫ Thank you for choosing our product. ⚫ To ensure the best performance of this product, please read this user guide fully and carefully before using it and keep this manual together with the product for future reference as needed.
  • Page 2 FDX-S Series Command Guide Trademarks ⚫ HDBaseT™ and the HDBaseT Alliance Logo are trademarks of the HDBaseT Alliance. ⚫ The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
  • Page 3 ⚫ Some information contained in this Command guide such as exact product appearance, communication commands, and so on may differ depending on the product version. ⚫ This Command guide is subject to change without notice. You can download the latest version from IDK’s website at: http://www.idkav.com...

  • Page 4: Table Of Contents

    FDX-S Series Command Guide Table of Contents About this Guide ............................5 Communication configuration and Specifications ..................5 RS-232C communication ........................5 2.1.1 RS-232C connector specification ....................5 2.1.2 RS-232C communication specification ..................5 2.1.3 Setting up RS-232C communication ..................... 6 2.1.4...

  • Page 5: About This Guide

    FDX-S Series Command Guide 1 About this Guide This guide contains the procedure for controlling the FDX-S using commands via RS-232C communication or LAN communication. 2 Communication configuration and Specifications 2.1 RS-232C communication 2.1.1 RS-232C connector specification Insert and secure the wires from the RS-232C cable into the supplied 3-pin captive screw connector, and then insert the captive screw connector into the mating connector on the FDX-S.

  • Page 6: Setting Up Rs-232C Communication

    FDX-S Series Command Guide 2.1.3 Setting up RS-232C communication (1) Connect the FDX-S and the control device via an RS-232C cable. (2) Set the RS-232C communication. 【Reference: User Guide】 (3) For the control device, set the same values in the same way as RS-232C communication (baud rate, data bit length, parity check, and stop bit) in step (2) above.

  • Page 7: Rs-232C Transmission Mode

    FDX-S Series Command Guide 2.1.4 RS-232C transmission mode Since the FDX-S supports RS-232C transmission over HDBaseT I/O boards, devices (camera and projector in the following example) that are connected to HDC series products can be controlled via RS-232C. External control...
  • Page 8 FDX-S Series Command Guide When the “3.3.18 RS-232C transmission mode” is set to RS-232C mode, received data will be sent to the specified output channel. Several sending channels can be set while only 1 receiving channel can be set. Example: Sending data to OUT12 and receiving the response from OUT12 ①...

  • Page 9: Lan Communication

    FDX-S Series Command Guide 2.2 LAN communication 2.2.1 LAN connector specification Pin assignment of the LAN connector is as follows. Since Auto MDI/MDI-X that distinguishes and switches straight/cross cables automatically is supported, extra care is not necessary to connect the FDX-S to PC, HUB or the like.

  • Page 10: Setting Up Lan Communication

    FDX-S Series Command Guide 2.2.3 Setting up LAN communication (1) Connect the FDX-S and the control device via a LAN cable. (2) Set up LAN communication as follows: ・ Set IP address and subnet mask ・ TCP pot number: 1100, 6000 to 6999 【Reference: User guide】...

  • Page 11: The Number Of Tcp-Ip Connections

    FDX-S Series Command Guide 2.2.4 The number of TCP-IP connections The FDX-S supports up to eight simultaneous TCP-IP connections (eight logical ports). To maintain optimal system accessibility, it is advisable to issue “port-open” and “port-close” commands before and after command or query strings are issued. This approach enables eight or more control devices to be effectively interfaced simultaneously and without concern for communication errors.

  • Page 12: Unsolicited Status Notification

    FDX-S Series Command Guide 2.3 Unsolicited status notification The FDX-S can notify status changes and problems in a system through RS-232C or LAN communication. Unsolicited status notification: (1) The unsolicited status notification feature is enabled using @SPH command. (2) The control device periodically sends @GIV command (30 seconds or shorter) to keep the connection.

  • Page 13: Command

    FDX-S Series Command Guide 3 Command 3.1 Summary The number of I/O channels depends on models. “n” in this section shows the number of channels. [Table 3.1] n = The number of channels FDX-S16, FDX-S16U FDX-S32, FDX-S32U A command consists of “@” (“40” in hexadecimal), 3 one-byte alphabetical characters (upper and lower cases), and parameters (one-byte numbers).

  • Page 14: Command List

    FDX-S Series Command Guide 3.2 Command list ■ Error status Command Function Page @ERR Error status ■ I/O channel selection Command Function Page @SSC Straight channel switching @GSW / @SSW I/O channel switching @GCY / @SCY Input channel selection copy ■...
  • Page 15 FDX-S Series Command Guide ■ Input timing Command Function Page @GPI / @SPI Horizontal/Vertical start position @GSI / @SSI Horizontal/Vertical active area ■ Picture controls Command Function Page @GOB / @SOB Output brightness @GOC / @SOC Output contrast @GGM / @SGM...
  • Page 16 FDX-S Series Command Guide ■ Preset memory Command Function Page @RCM Recalling crosspoint @SCM Saving preset memory @SEM Saving preset memory @GCM / @ECM Editing crosspoint @RPM Recalling crosspoint @SPM Saving preset memory @GPM Preset memory number matching I/O channel status ■...
  • Page 17 FDX-S Series Command Guide ■ RS-232C transmission mode Command Function Page @G++ / @S++ RS-232C transmission sending channel @G+R / @S+R RS-232C transmission receiving channel @G+S / @S+S RS-232C transmission mode...

  • Page 18: Details Of Commands

    FDX-S Series Command Guide 3.3 Details of commands 3.3.1 Error status @ERR Error status Description Response in case the command is not executed Response @ERR, error Parameter error: Error status 1 = Erroneous parameter format or value 2 = Undefined command or wrong format...
  • Page 19 FDX-S Series Command Guide @GSW / @SSW I/O channel switching Getting Command @GSW @GSW, v_1, v_2, ･･･, v_8 (, v_9 ･･･, v_n ) Response @SSW, in_1, out_1 (, in_2, out_2 ･･･) Setting Command @SSW, in_1, out_1 (, in_2, out_2 ･･･)

  • Page 20: Output Position, Size, And Masking

    FDX-S Series Command Guide 3.3.3 Output position, size, and masking @GOT / @SOT Output resolution Getting Command @GOT, out_ch Response @GOT, out_ch, auto, resolution Setting Command @SOT, out_ch, auto, resolution Response @SOT, out_ch, auto, resolution Parameter out_ch: Output channel 1 to n = OUT1 to OUTn auto: Output resolution mode 0 = Resolution can be specified for the “resolution”...
  • Page 21 FDX-S Series Command Guide @GUM / @SUM Aspect ratio for sink device Getting Command @GUM, out_ch Response @GUM, out_ch, aspect Setting Command @SUM, out_ch, aspect Response @SUM, out_ch, aspect Parameter out_ch: Output channel 1 to n = OUT1 to OUTn...
  • Page 22 FDX-S Series Command Guide @GMR / @SMR Image size/Image position Getting Command @GMR, out_ch Response @GMR, out_ch, h_zoom, v_zoom, h_posi, v_posi Setting Command @SMR, out_ch, h_zoom, v_zoom, h_posi, v_posi Response @SMR, out_ch, h_zoom, v_zoom, h_posi, v_posi Parameter out_ch: Output channel...
  • Page 23 FDX-S Series Command Guide @GBC / @SBC Background color Getting Command @GBC, out_ch Response @GBC, out_ch, m_red, m_green, m_blue, b_red, b_green, b_blue Setting Command @SBC, out_ch, m_red, m_green, m_blue, b_red, b_green, b_blue Response @SBC, out_ch, m_red, m_green, m_blue, b_red, b_green, b_blue...
  • Page 24 FDX-S Series Command Guide @GTP / @STP Test pattern Getting Command @GTP, out_ch Response @GTP, out_ch, pattern Setting Command @STP, out_ch, pattern Response @STP, out_ch, pattern Parameter out_ch: Output channel 1 to n = OUT1 to OUTn pattern: Test pattern...
  • Page 25 FDX-S Series Command Guide @GVW / @SVW Videowall configuration/Image position Getting Command @GVW, out_ch Response @GVW, out_ch, h_type, v_type, h_posi, v_posi Setting Command @SVW, out_ch, h_type, v_type, h_posi, v_posi Response @SVW, out_ch, h_type, v_type, h_posi, v_posi Parameter out_ch: Output channel...
  • Page 26 FDX-S Series Command Guide @GIM / @SIM Synchronization mode Getting Command @GIM @GIM, mode_1 ･･･, mode_2 (, mode_3 ･･･, mode_x) Response @SIM, slot_1, mode_1 (,slot_2, mode_2 ･･･) Setting Command @SIM, slot_1, mode_1 (,slot_2, mode_2 ･･･) Response Parameter mode_1-x: Synchronization mode...

  • Page 27: Output

    FDX-S Series Command Guide 3.3.4 Output @GEN / @SEN HDCP output Getting Command @GEN, out_ch Response @GEN, out_ch, hdcp Setting Command @SEN, out_ch, hdcp Response @SEN, out_ch, hdcp Parameter out_ch: Output channel 0 = All outputs , 1 to n = OUT1 to OUTn...
  • Page 28 FDX-S Series Command Guide @GDM / @SDM Output format Getting Command @GDM @GDM, mode_1 ･･･, mode_8(, mode_9 ･･･, mode_n ) Response @SDM, out_1, mode_1 (,out_2, mode_2 ･･･) Setting Command @SDM, out_1, mode_1 (,out_2, mode_2 ･･･) Response Parameter out_1-n: Output channel...
  • Page 29 FDX-S Series Command Guide @GFA / @SFA Video transition effect Getting Command @GFA, out_ch Response @GFA, out_ch, mode Setting Command @SFA, out_ch, mode @SFA, out_ch, mode Response Parameter out_ch: Output channel 0 = All outputs , 1 to n = OUT1 to OUTn...
  • Page 30 FDX-S Series Command Guide @GHM / @SHM Sink device EDID check Getting Command @GHM @GHM, mode_1, ･･･, mode_8 (, mode_9 ･･･, mode_n ) Response @SHM, out_1, mode_1 (,out_2, mode_2 ･･･) Setting Command @SHM, out_1, mode_1 (,out_2, mode_2 ･･･) Response Parameter...
  • Page 31 FDX-S Series Command Guide @GMK / @SMK Hot plug ignoring duration Getting Command @GMK @GMK, mask_1, ･･･, mask_8(, mask_9 ･･･, mask_n ) Response @SMK, out_1, mask_1 (, out_2, mask_2 ･･･) Setting Command @SMK, out_1, mask_1 (, out_2, mask_2 ･･･) Response...

  • Page 32: Input Position, Size, And Masking

    FDX-S Series Command Guide 3.3.5 Input position, size, and masking @GAP / @SAP Aspect ratio Getting Command @GAP, in_ch Response @GAP, in_ch, aspect Setting Command @SAP, in_ch, aspect Response @SAP, in_ch, aspect Parameter in_ch: Input channel 1 to n = IN1 to INn...

  • Page 33: Input

    FDX-S Series Command Guide 3.3.6 Input @GDT / @SDT No-signal input monitoring Getting Command @GDT @GDT, time_1, ･･･, time_8(, time_9 ･･･, time_n ) Response @SDT, in_1, time_1 (, in_2, time_2 ･･･) Setting Command @SDT, in_1, time_1 (, in_2, time_2 ･･･)
  • Page 34 FDX-S Series Command Guide @GAG / @SAG SDI input audio group Getting Command @GAG Response @GAG, primary_1, secondary_1,･･･ primary_8, secondary_8 (, primary_9, secondary_9 ･･･, primary_n, secondary_n ) @SAG, in_1, primary_1, secondary_1 (, in_2, primary_2, secondary_2 ･･･) Setting Command @SAG, in_1, primary_1, secondary_1 (, in_2, primary_2, secondary_2 ･･･)
  • Page 35 FDX-S Series Command Guide @GDU/ @SDU 3G-SDI Dual Stream Getting Command @GDU @GDU, select_1,･･･, select_8 (, select_9 ･･･, select_n ) Response @SDU, in_1, select_1 (, in_2, select_2 ･･･) Setting Command @SDU, in_1, select_1 (, in_2, select_2 ･･･) Response Parameter select_1-n: Input video of each input channel 1 = Video stream 1 [Default], 2 = Video stream 2, -1 = No 3G-SDI input board is installed.

  • Page 36: Input Timing

    FDX-S Series Command Guide 3.3.7 Input timing @GPI / @SPI Horizontal/Vertical start position Getting Command @GPI, in_ch Response @GPI, in_ch, h_posi, v_posi Setting Command @SPI, in_ch, h_posi, v_posi Response @SPI, in_ch, h_posi, v_posi Parameter in_ch: Input channel 1 to n = IN1 to INn...
  • Page 37 FDX-S Series Command Guide @GSI / @SSI Horizontal/Vertical active area Getting Command @GSI, in_ch Response @GSI, in_ch, h_size, v_size Setting Command @SSI, in_ch, h_size, v_size Response @SSI, in_ch, h_size, v_size Parameter in_ch: Input channel 1 to n = IN1 to INn...

  • Page 38: Picture Controls

    FDX-S Series Command Guide 3.3.8 Picture controls @GOB / @SOB Output brightness Getting Command @GOB, out_ch Response @GOB, out_ch, bright Setting Command @SOB, out_ch, bright Response @SOB, out_ch, bright Parameter out_ch: Output channel 1 to n = OUT1 to OUTn...
  • Page 39 FDX-S Series Command Guide @GGM / @SGM Output gamma Getting Command @GGM, out_ch Response @GGM, out_ch, gamma Setting Command @SGM, out_ch, gamma Response @SGM, out_ch, gamma Parameter out_ch: Output channel 1 to n = OUT1 to OUTn gamma: Gamma 1 to 30 = 0.1 to 3.0 [Default] 10 = 1.0, -2 = No scan conversion output board is installed.
  • Page 40 FDX-S Series Command Guide @GOA / @SOA Output settings Getting Command @GOA, out_ch Response @GOA, out_ch, auto, resolution, aspect, pattern, h_zoom, v_zoom, h_posi, v_posi, m_red, m_green, m_blue, b_red, b_green, b_blue, c_red, c_green, c_blue, brightness, mode, hdcp Setting Command @SOA, out_ch, auto, resolution, aspect, pattern, h_zoom, v_zoom, h_posi,...
  • Page 41 FDX-S Series Command Guide Output settings (Cont’d) @GOA / @SOA Parameter pattern: Test pattern 0 = OFF [Default], 1 = COLOR BAR, 2 = 16 STEP GRAY, 3 = 256 STEP GRAY, 4 = 100% WHITE RASTER, 5 = 100% RED RASTER,...
  • Page 42 FDX-S Series Command Guide Output settings (Cont’d) @GOA / @SOA Getting Command @GOA,1 example Response @GOA,1,1,17,0,0,1000,1000,+0,+0,0,0,0,0,0,0,100,100,100,100,1,1 Description Getting the OUT1 output settings - Output resolution mode : Automatically output with WXGA@60(2048x1152) - Aspect ratio for sink device : To be output with aspect ratio of output resolution...
  • Page 43 FDX-S Series Command Guide @GFL / @SFL Input sharpness Getting Command @GFL, in_ch Response @GFL, in_ch, sharp Setting Command @SFL, in_ch, sharp Response @SFL, in_ch, sharp Parameter in_ch: Input channel 1 to n = IN1 to INn sharp: Sharpness -5 to 15 [Default] 0, -1 = No input board is installed.
  • Page 44 FDX-S Series Command Guide @GIB / @SIB Input brightness Getting Command @GIB, in_ch Response @GIB, in_ch, bright Setting Command @SIB, in_ch, bright Response @SIB, in_ch, bright Parameter in_ch: Input channel 1 to n = IN1 to INn bright: Input brightness 0 to 200 [Default] 100, -1 = No input board is installed.
  • Page 45 FDX-S Series Command Guide @GIC / @SIC Input contrast Getting Command @GIC, in_ch Response @GIC, in_ch, red, green, blue Setting Command @SIC, in_ch, red, green, blue Response @SIC, in_ch, red, green, blue Parameter in_ch: Input channel 1 to n = IN1 to INn...
  • Page 46 FDX-S Series Command Guide @GHU / @SHU Input hue Getting Command @GHU, in_ch Response @GHU, in_ch, hue Setting Command @SHU, in_ch, hue Response @SHU, in_ch, hue Parameter in_ch: Input channel 1 to n = IN1 to INn Parameter hue: Hue 0 to 359 [Default] 0, -1 = No input board is installed.
  • Page 47 FDX-S Series Command Guide @GST / @SST Input saturation Getting Command @GST, in_ch Response @GST, in_ch, saturation Setting Command @SST, in_ch, saturation Response @SST, in_ch, saturation Parameter in_ch: Input channel 1 to n = IN1 to INn saturation: Saturation 0 to 200 [Default] 100, -1 = No input board is installed.
  • Page 48 FDX-S Series Command Guide @GEF / @SEF Input settings Getting Command @GEF, in_ch Response @GEF, in_ch, h_size, v_size, h_posi, v_posi, aspect, red, green, blue, bright, sharpness, hue, saturation Setting Command @SEF, in_ch, h_size, v_size, h_posi, v_posi, aspect, red, green, blue, bright,...
  • Page 49 FDX-S Series Command Guide Input settings (Cont’d) @GEF / @SEF Getting Command @GEF,1 example Response @GEF,1,+0,+0,+0,+0,0,100,100,100,100,0,0,100 Description Getting the IN1 input settings - Horizontal and vertical active area - Horizontal and vertical start position : 0 - Aspect ratio of input signal...

  • Page 50: Output Audio

    FDX-S Series Command Guide 3.3.9 Output audio @GAM / @SAM Mute Getting Command @GAM @GAM, mode_1, ･･･, mode_8 (, mode_9 ･･･, mode_n ) Response @SAM, out_1, mode_1 (, out_2, mode_2 ･･･) Setting Command @SAM, out_1, mode_1 (, out_2, mode_2 ･･･)

  • Page 51: Edid

    FDX-S Series Command Guide 3.3.10 EDID @GEC / @SEC External EDID Getting Command @GEC @GEC, out_1, ･･･, out_8 (, out_9 ･･･, out_n ) Response @SEC, in_1, out_1 (, in_2, out_2 ･･･) Setting Command @SEC, in_1, out_1 (, in_2, out_2 ･･･)
  • Page 52 FDX-S Series Command Guide @GVF / @SVF Resolution Getting Command @GVF @GVF, edid_1, ･･･, edid_8 (, edid_9 ･･･, edid_n ) Response @SVF, in_1, edid_1 (, in_2, edid_2 ･･･) Setting Command @SVF, in_1, edid_1 (, in_2, edid_2 ･･･) Response Parameter edid_1-n: EDID resolution...
  • Page 53 FDX-S Series Command Guide @RME Copying EDID Setting Command @RME, out, number Response @RME, out, number Parameter out: Channel to be read 1 to n = OUT1 to OUTn number: Destination memory number 1 to 4 = Destination 1 to Destination 4...
  • Page 54 FDX-S Series Command Guide @GDI / @SDI Deep Color Getting Command @GDI @GDI, color_1, ･･･, color_8 (, color_9 ･･･, color_n ) Response @SDI, in_1, color_1 (, in_2, color_2 ･･･) Setting Command @SDI, in_1, color_1 (, in_2, color_2 ･･･) Response Parameter...
  • Page 55 FDX-S Series Command Guide @GAF / @SAF Audio format Getting Command @GAF,in @GAF, in, format_1, frequency_1, ･･･, format_8, frequency_8 (, Response format_9, frequency_9 ･･･, format_n, frequency_n ) @SAF, in, format_1, frequency_1 (, format_2, frequency_2 ･･･) Setting Command @SAF, in, format_1, frequency_1 (, format_2, frequency_2 ･･･)
  • Page 56 FDX-S Series Command Guide @GSP / @SSP Speaker configuration Getting Command @GSP @GSP, ch_1, ･･･, ch_8 (, ch_9 ･･･, ch_n ) Response @SSP, in_1, ch_1 (, in_2, ch_2 ･･･) Setting Command @SSP, in_1, ch_1 (, in_2, ch_2 ･･･) Response Parameter...

  • Page 57: Rs-232C

    FDX-S Series Command Guide 3.3.11 RS-232C @GCT / @SCT RS-232C communication Getting Command @GCT @GCT, baudrate, length, parity, stop Response @SCT, baudrate, length, parity, stop Setting Command @SCT, baudrate, length, parity, stop Response Parameter baudrate: Baud rate 0 = 4800 bps,...

  • Page 58: Lan

    FDX-S Series Command Guide 3.3.12 LAN @GIP / @SIP IP address Getting Command @GIP Response @GIP, unit_1, unit_2, unit_3, unit_4 Setting Command @SIP, unit_1, unit_2, unit_3, unit_4 Response @SIP, unit_1, unit_2, unit_3, unit_4 Parameter unit_1 to unit_4: Upper bit of the IP address to Lower bit of the IP address 0 to 255 = 8 bit (Decimal notation) [Default] 192.168.1.199...
  • Page 59 FDX-S Series Command Guide @GMC MAC address Getting Command @GMC Response @GMC, unit_1, unit_2, unit_3, unit_4, unit_5, unit_6 Parameter unit_1 to unit_6: Upper bit of the MAC address to Lower bit of the MAC address 00 to FF = 8 bit (in hexadecimal)

  • Page 60: Preset Memory

    FDX-S Series Command Guide 3.3.13 Preset memory @RCM Recalling crosspoint @RCM, memory Setting Command @RCM, memory Response Parameter memory: Crosspoint memory 1 to 32 @RCM,1 Setting Command example Response @RCM,1 Description Recalling the crosspoint of Crosspoint memory 1 Completed －...
  • Page 61 FDX-S Series Command Guide @SEM Saving preset memory @SEM, memory (, name) Setting Command Response @SEM, memory (, name) Parameter memory: Crosspoint memory 1 to 32 name: Memory name Up to 10 characters from 20 to 7D from ASCII code If you skip this parameter (“name”), only crosspoint settings are saved without...
  • Page 62 FDX-S Series Command Guide @RPM Recalling crosspoint @RPM, preset Setting Command Response @RPM, preset Parameter preset: Preset memory 1 to 32 @RPM,1 Setting Command @RPM,1 example Response Description Recalling the I/O channel status of Preset memory 1 Completed － Remarks...

  • Page 63: Bitmap

    FDX-S Series Command Guide 3.3.14 Bitmap @GBM / @SBM Bitmap image output Getting Command @GBM @GBM, mode_1, ･･･, mode_8(, mode_9 ･･･, mode_n ) Response Setting Command @SBM, out_1, mode_1 (, out_2, mode_2･･･) Response @SBM, out_1, mode_1 (, out_2, mode_2･･･) Parameter...
  • Page 64 FDX-S Series Command Guide @GBB / @SBB Background color Getting Command @GBB, ch Response @GBB, ch, red, green, blue Setting Command @SBB, ch, red, green, blue Response @SBB, ch, red, green, blue Parameter ch: Output channel 1 to n = OUT1 to OUTn...
  • Page 65 FDX-S Series Command Guide @GZP / @SZP Image position Getting Command @GZP @GZP, position_1, ･･･, position_8 (, position_9 ･･･, position_n ) Response Setting Command @SZP, ch_1, position_1 (, ch_2, position_2,･･･, ch_n, position_n ) Response @SZP, ch_1, position_1 (, ch_2, position_2,･･･, ch_n, position_n )

  • Page 66: Configuring Fdx-S

    FDX-S Series Command Guide 3.3.15 Configuring FDX-S @GLS / @SLS Front panel security lockout @GLS Getting Command @GLS, lock Response @SLS, lock Setting Command @SLS, lock Response Parameter lock: Front panel security lockout 0 = Unlocking [Default], 1 = Locking, 2 = Changing the current setting...

  • Page 67: Status Indication

    FDX-S Series Command Guide 3.3.16 Status indication @GIS Input signal status (For each channel) @GIS, in, mode Getting Command @GIS, in, mode, status_1 (, status_2, status_3, status_4, status_5 ) Response Parameter in: Input channel 1 to n = IN1 to INn...
  • Page 68 FDX-S Series Command Guide Input signal status (For each channel) (Cont’d) @GIS status_5: Presence of HDCP Value Description HDCP 1.4 HDCP 1.4 signal HDCP 2.2 HDCP 2.2 no stream type or undefined signal is input HDCP 2.2 Type0 HDCP 2.2 stream Type0 signal HDCP 2.2 Type1...
  • Page 69 FDX-S Series Command Guide @GOS Output signal status (For each channel) @GOS, out, mode Getting Command Response @GOS, out, mode, status_1 (, status_2) Parameter out: Output channel 1 to n = OUT1 to OUTn mode: Target status 0 = All statuses of sink device,...
  • Page 70 FDX-S Series Command Guide @GHC System status Getting Command @GHC Response @GHC, voltage, rpm, temp, in, out Parameter voltage: Power supply voltage status 0 = Normal, 1 = Abnormal rpm: Fan status 0 = Normal, 1 = Abnormal temp: Internal temperature status...
  • Page 71 FDX-S Series Command Guide @GSS Board mounting status @GSS, board Getting Command @GSS, board, slot_1, slot_2 (,slot_3, ･･･, slot_n ) Response Parameter board: Board selection 0 = Input board, 1 = Output board slot_1-n: Board mounting status If “board” is set to “0”: 0 = No board is installed.,...
  • Page 72 FDX-S Series Command Guide @GPS Power supply voltage status @GPS Getting Command Response @GPS, status1 (,status2) Parameter status1,2: Status 0 = Normal, 1 = Abnormal @GPS Getting Command example Response @GPS,0 Description Getting the power supply voltage Normal － Remarks...

  • Page 73: Status Notification

    FDX-S Series Command Guide 3.3.17 Status notification @GPH / @SPH Notification interval Getting Command @GPH @GPH, time Response @SPH, time Setting Command @SPH, time Response Parameter time: Notification time 0 = OFF [Default], 1 to 50 = 100 ms. to 5000 ms.
  • Page 74 FDX-S Series Command Guide @PSH Unsolicited status notification @PSH, in,out, system Getting Response Parameter in: Checking if input status changes 0 = Not change, 1 to FFFFFFFF = Changes IN16 IN15 IN14 IN13 IN16 IN15 IN14 IN13 IN24 IN23 IN22...
  • Page 75 FDX-S Series Command Guide @AIN Input signal status (For each channel) @AIN, in Getting Command Response @AIN, status_1, status_2, status_3, status_4, status_5, status_6, status_7, status_8, status_9, status_10, status_11, status_12, status_13, status_14, status_15, status_16, status_17, status_18, status_19 Parameter in: Input channel...
  • Page 76 FDX-S Series Command Guide @AIN Input signal status (For each channel) (Cont’d) Parameter status_8: Input video frequency Value Description No signal is input. 59.94 59.94Hz status_9: Progressive or interlace scan Value Description 0: No signal is input. 1: Progressive 2: Interlace...
  • Page 77 FDX-S Series Command Guide @AIN Input signal status (For each channel) (Cont’d) Parameter status_14: +5V input status Value Description 0: No +5V signal is input. 1: +5V signal is input. status_15: Presence of input video HDCP encryption (Encryption from source...
  • Page 78 FDX-S Series Command Guide @AIN Input signal status (For each channel) (Cont’d) Parameter status_19: Audio input HBR mode Value Description 0: No signal is input. 1: Mode other than HBR (PCM mode, other compressed audio) 2: HBR mode @AIN,1 Getting Command @AIN,1,FDX-S16U,01.00.00,15,1,1920,1080,59.94,1,2,1,2,1,1,2,1,5,9,1...
  • Page 79 FDX-S Series Command Guide @AOT Output signal status (For each channel) @AOT,out Getting Command Response @AOT, status_1, status_2, status_3, status_4, status_5, status_6, status_7, status_8, status_9, status_10, status_11, status_12, status_13, status_14, status_15, status_16, status_17, status_18, status_19, status_20, status_21, status_22, status_23, status_24, status_25...
  • Page 80 FDX-S Series Command Guide @AOT Output signal status (For each channel) (Cont’d) Parameter status_7: Horizontal pixels of output video Value Description No signal is output. 1920 1920 pixels status_8: Vertical pixels of output video Value Description No signal is output.
  • Page 81 FDX-S Series Command Guide @AOT Output signal status (For each channel) (Cont’d) Parameter status_13: Color range of output video Value Description 0: No signal is output. 1: Limited range output 2: Full range output status_14: Color depth of output video...
  • Page 82 FDX-S Series Command Guide @AOT Output signal status (For each channel) (Cont’d) Parameter status_18: Audio output type Value Description 0: No signal is output. 1: LPCM 2: Compressed audio status_19: Reading EDID Value Description 0: Not connected 1: Failed 2: Completed...
  • Page 83 FDX-S Series Command Guide @AOT Output signal status (For each channel) (Cont’d) Parameter status_23: HDCP (sink) Value Description 0: Not connected 1: HDCP is not supported. 2: HDCP 1.4 supported 3: HDCP 2.2 supported status_24: SCDC (sink) Value Description 0: Not connected 1: SCDC is not supported.
  • Page 84 FDX-S Series Command Guide @AOT Output signal status (For each channel) (Cont’d) @AOT,1 Getting Command example Response @AOT,1,FDX-S16U,01.00.00,21,1,1,1920,1080,59.94,1,2,1,2,1,1,4,1,1,2,2,7,1,2 ,2,2 Description Getting all statuses of OUT1 output signal - Output channel : OUT1 - Model number : FDX-S16U - Version : 01.00.00...
  • Page 85 FDX-S Series Command Guide @GAA Alarm status @GAA Getting Command @GAA, status_1, status_2, status_3, status_4, status_5_1, staus_5_2, ･･･ , Response status_5_8, status_6_1, status_6_2, ･･･ , status_6_8, status_7_1, status_7_2, ･･･ , status_7_5 Parameter status_1: Model number Value Description FDX-S16U Model number...
  • Page 86 FDX-S Series Command Guide Alarm status (Cont’d) @GAA Parameter status_6_1-8: Output board status FDX-S16U/S16 : Four boards of status_6_1 to status_6_4 FDX-S32U/S32 : Eight board of status_6_1 to status_6_8 Value Description 0: Normal 2: Temperature problem 4: Problem other than temperature -1: No board is installed.
  • Page 87 FDX-S Series Command Guide Alarm status (Cont’d) @GAA @GAA Getting Command @GAA,FDX-S32U,01.00.00,22,0,0,0,0,0,-1,-1,-1,-1,0,0,0,0,-1,-1,-1,-1,0,0,0,0 example Response Description Getting all alarm statuses - Model number : FDX-S32U - Version : 01.00.00 - The number of valid data : 22 - Power supply voltage status : Normal...

  • Page 88: Rs-232C Transmission Mode

    FDX-S Series Command Guide 3.3.18 RS-232C transmission mode @G++ / @S++ RS-232C transmission sending channel @G++ Getting Command @G++, ch_1,･･･, ch_8 (, ch_9 ･･･, ch_n ) Response @S++, ch_1 (, ch_2, ･･･) Setting Command @S++, ch_1 (, ch_2, ･･･) Response...
  • Page 89 FDX-S Series Command Guide @G+R / @S+R RS-232C transmission receiving channel @G+R Getting Command Response @G+R, channel Setting Command @S+R, channel @S+R, channel Response Parameter channel: RS-232C transmission receiving channel 1 to n = OUT1 to OUTn 101 to 10n = IN1 to INn...
  • Page 90 7-9-1 Chuo, Yamato-shi, Kanagawa-pref. 242-0021 JAPAN TEL: +81-46-259-6920 FAX: +81-46-259-6930 Email: info@arvanics.com URL: http://www.arvanics.com Information in this document is subject to change without notice. ©2020 IDK Corporation, all rights reserved. All trademarks mentioned are the property of their respective owners.

This manual is also suitable for:

Fdx-s16Fdx-s16uFdx-s32Fdx-s32u

Table of Contents