Huawei MateBook HZ-W09 Quick Start Manual page 13

Pull the cap off the stylus.
1.
Connect your MatePen to a 5 V charger using the micro USB cable.
2.
Once charging is complete, place the cap back onto the stylus by
3.
aligning the Laser button with the buttons on the stylus body.
Changing the tip
Unscrew the base in a clockwise direction.
1.
Remove the tip.
2.
Insert the new tip into the base.
3.
Turn the base counter clockwise to screw it back onto the stylus.
4.
The MatePen contains delicate components. A lways follow the instructions in
this guide when charging the MatePen or changing the tip. Do not use excessive
force when removing components.
When changing the tip, keep it in your hand to avoid losing it.
The stylus components (such as the tip) are a choking hazard and should be
kept out of the reach of children.
9