Table of Contents
Advertisement
The flash always fires at full output.
Flash units other than EL/EX series Speedlites used in autoflash mode always fire at full
output (
).
When the flash Custom Function setting for [Flash metering mode] is set to [TTL flash
metering] (autoflash), the flash will always fire at full output (
Flash exposure compensation cannot be set.
If flash exposure compensation is already set with the Speedlite, flash exposure
compensation cannot be set with the camera. When the Speedlite's flash exposure
compensation is canceled (set to 0), flash exposure compensation can be set with the
camera.
High-speed sync is not available in <
Set [Slow synchro] in [
sec. (fixed)] (or [1/200 sec. (fixed)] ) (
Remote control shooting is not possible.
In still photo shooting, set the drive mode to [
[
: Remote control] to [Enable] (
Check the position of the remote control's release timing switch.
If you are using Wireless Remote Control BR-E1, see
Connecting to a Wireless Remote
Infrared remote controllers such as the RC-6 cannot be used for remote control shooting
when the camera is paired via Bluetooth with a smartphone or wireless remote control.
Set [Bluetooth settings] to [Disable].
To use a remote control for time-lapse movie recording, see
A white [ ] or red [ ] icon is displayed during shooting.
It indicates that the camera's internal temperature is high. Image quality of still photos
may be worse when a white [
that shooting will soon stop automatically (
A red [ ] icon is displayed during movie recording.
It indicates that the camera's internal temperature is high. If the red [
displayed, it indicates that the movie recording will soon stop automatically (
: External Speedlite control] to an option other than [1/250
).
).
Control.
] icon is displayed. Display of a red [
).
824
).
> or <
> mode.
] or [
] (
). In movie recording, set
Remote Control Shooting
Time-Lapse
or
Movies.
] icon indicates
] icon is
).
Advertisement
Table of Contents
