Table of Contents
Advertisement
Removal
1.
Open the cover.
Set the power switch to <
Check that the access lamp (1) is off, then open the cover.
If [Saving...] is displayed on the screen, close the cover.
2.
Remove the card.
Gently push in the card, then let it go to eject.
Pull the card straight out, then close the cover.
Caution
Do not remove cards immediately after a red [
shooting. Cards may be hot, due to high internal camera temperature. Set the power
switch to <
> and stop shooting for a while before removing cards. Removing hot
cards immediately after shooting may cause you to drop and damage them. Be careful
when removing cards.
>.
] icon is displayed as you are
49
Advertisement
Table of Contents
