Advertisement
Quick Links
StealthMod
I N S T A L L A T I O N G U I D E
for the
SMS-P-987C-BASE
SMS-P-987C-PREM
SKU# 94556/94569
2006 & Up Porsche Cayman 987C
Thank you for choosing a JL Audio StealthMod® System for your automotive sound system.
With proper installation, your new vehicle-specific audio system
will deliver years of listening pleasure.
We strongly recommend that you have your new StealthMod® System installed by your authorized
JL Audio dealer. The installation professionals employed by your dealer have the necessary tools
and experience to disassemble and reassemble your vehicle properly. If you prefer to perform your
own installation, please read this installation guide completely before beginning the process.
®
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
S T E A L T H B O X ® S P E C I F I C A T I O N S
Enclosure Type: Sealed
Driver Type: 13TW5v2-2
Nominal Impedance: 2 ohms
Continuous Power Handling: 600 watts (RMS method)
I N C L U D E D E Q U I P M E N T
(1) HD900/5 Amplifier
(1) Pair C5-650x
(1) XD-MFB-MAXI Fuse Holder
(1) XD-MAXI-60 Fuse
(1) Pair XD-CLRAIC2-SW Speaker to RCA Adaptor
(2) XD-CLRAICY-1F2M Y-adaptor
(1) XD-CLRAIC2-12 RCA Cable
Premium System Only:
(1) CL-SSI
I N C L U D E D H A R D W A R E
(1) Amplifier Cover Panel
(2) Speaker Adaptor
(2) Crossover Adaptor
(4) Foam Tape Strip
(4) #8 x 5/8" Pan Head Screw
(4) #8 x 1/2" Pan Head Screw
(4) 8 - 32 x 5/8" Screw
(4) #8 Lock Washer
(1) Fuse Tap
(1) Fuse Holder
(1) 3 amp fuse
(1) 1 amp fuse
Premium System Only:
(4) 8 - 32 x 3/8" Screw
(4) #8 Flat Washer
(4) #8 Lock Washer
®
be properly mounted to the vehicle according to these
(1) Terminated 60 Amp Power Wire
(1) Terminated 60 Amp Ground Wire
(1) 16 Gauge Speaker Cable
(1) 12 Gauge Speaker Cable
(1) 16 Gauge Remote Wire
(4) Snap Grommet
(16) #8 x 3/4" Pan Head Screw
(1) 1/2" Split Loom
(1) 1" Split Loom
SMS-P-987C INSTR_SKU# 011358
INSTALLATION
D I F F I C U L T Y :
4
OUT
5
OF
ESTIMATED TIME:
4 HOURS
Continued on Next Page
Advertisement
Related Manuals for JL Audio StealthMod SMS-P-987C-BASE
Summary of Contents for JL Audio StealthMod SMS-P-987C-BASE
- Page 1 (2) XD-CLRAICY-1F2M Y-adaptor (1) XD-CLRAIC2-12 RCA Cable Premium System Only: Thank you for choosing a JL Audio StealthMod® System for your automotive sound system. (1) CL-SSI With proper installation, your new vehicle-specific audio system will deliver years of listening pleasure.
-
Page 2: Input Sensitivity Setting
The diagram below shows the recommended crossover and input sensitivity settings for the HD900/5 in the Base System. For a detailed description of the amplifier settings, consult the owner’s manual for the amplifier. Input Sensitivity Setting: Front - minimum Rear - minimum Sub - 11 o’clock Page 2 • JL Audio, Inc., 2013 Continued on Next Page... - Page 3 The diagram below shows the recommended crossover and input sensitivity settings for the HD900/5 in the Premium System. For a detailed description of the amplifier settings, consult the owner’s manual for the amplifier. Input Sensitivity Settings: Front - 1 o’clock Rear - 1 o’clock Sub - 4 o’clock Page 3 • JL Audio, Inc., 2013 Continued on Next Page...
- Page 4 Pictured is the Premium System speaker with the door Carefully unclip the trim panel at the top of the door and remove the panel. panel removed. Unplug, unbolt, and remove the speaker. Page 4 • JL Audio, Inc., 2013 Continued on Next Page...
- Page 5 Premium System, or a pair of #8 x 1/2” Pan Head on the C5-650x Speaker. Screws on vehicles with the Base System. Mount the C5-650x Speaker to the Speaker Adaptor using eight #8 x 3/4” Pan Head Screws. Page 5 • JL Audio, Inc., 2013 Continued on Next Page...
-
Page 6: Premium System
Remove the screw at the front passenger side of the radio conslole, and remove the carpeted panel. Steps 20-29 are only necessary on vehicles with the Base System. For vehicles with the Premium System, skip to Step 30. Page 6 • JL Audio, Inc., 2013 Continued on Next Page... - Page 7 Stealthbox® into position. Route the remove the radio. 12 Gauge Speaker Cable behind the driver’s side carpeted panel toward the front of the vehicle. Tighten the Straps around the enclosure as shown. Page 7 • JL Audio, Inc., 2013 Continued on Next Page...
- Page 8 Remove the fuse panel cover from the driver’s kick panel. Carefully route the wires around the battery to the passenger Unscrew and remove the kick panel. side. Cover the wiring with 1/2” Loom as shown. Page 8 • JL Audio, Inc., 2013 Continued on Next Page...
- Page 9 8 - 32 x 5/8” Screws and four #8 Lock Washers. Premium System Only: Secure the CL-SSI to the panel using four 8 - 32 x 3/8” Screws, four #8 Flat Washers, and four #8 Lock Washers. Page 9 • JL Audio, Inc., 2013 Continued on Next Page...
- Page 10 . j l a u d i o . c o m All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered trademarks of JL Audio, Inc.,. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.,.