Advertisement
Quick Links
I N S T A L L A T I O N G U I D E
for the
SB-GM-C7CP2/10TW3
SKU# 94604
2014 & Up Corvette C7 Stingray
Enclosure Type: Sealed
Driver Type: 10TW3-D4
Nominal Impedance: 4 ohms
Continuous Power Handling: 800 watts (RMS method)
If you choose to perform the installation yourself, it is absolutely vital
that the Stealthbox
be properly mounted to the vehicle according to
®
these instructions. Failure to mount the enclosure properly presents two
problems:
1) The sub-bass performance will suffer due to the movement of the
enclosure caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a
collision or sudden deceleration.
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your
authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble and reassemble
your vehicle properly. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
SB-GM-C7CP2/10TW3 INSTR_SKU# 011382
INSTALLATION
DIFFICULTY:
1
5
OUT
OF
ESTIMATED TIME:
1/2 HOUR
Continued on Next Page
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for JL Audio Stealthbox SB-GM-C7CP2
Summary of Contents for JL Audio Stealthbox SB-GM-C7CP2
- Page 1 1/2 HOUR Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper installation, your new vehicle-specific enclosed subwoofer system I N S T A L L A T I O N G U I D E will deliver years of listening pleasure.
- Page 2 SB-GM-C7CP2/10TW3 INSTR_SKU# 011382 I N C L U D E D H A R D WA R E Page 2 • JL Audio, Inc., 2016 Continued on Next Page...
- Page 3 Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your Stealth- box® amplifier. Other kits are available should you be using more than one amplifier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for both channels of the amplifier.
- Page 4 All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, and “Stealthbox” and the Stealthbox logo are registered trademarks of JL Audio, Inc. “Ahead of the Curve”, its respective logo, and “How we play” are trademarks of JL Audio, Inc.
Need help?
Do you have a question about the Stealthbox SB-GM-C7CP2 and is the answer not in the manual?
Questions and answers