Koso XR-01S Installation Manual

● Thank you for purchasing the our product. Before installing, please read the instruction carefully and keep it for future refer ence.
Notice
●
Please, follow the step-by-step instructions for proper installation. Any damages caused by faulty installation shall be impute d to the users.
●
To avoid a short circuit, do not pull the wires when installing the unit. Do not break or modify the wires either.
●
Do not disassemble or change any parts.
●
Maintenance and repairs should be executed by our professionals only.
◎MARK MEANING:
Some procedures must be followed to avoid faulty installation.
Some procedures must be followed to avoid damages from occuring to yourself and to others.
Some procedures must be followed to avoid damages from occuring to the vehicle.
If any information remains unclear, after following the instructions, please seek professional assistance.
1-1
Accessories
1
Meter X 1
M10 / S type speed
5
sensor bracket X 1
9
M4 X 10L screw X 2
NOTE
Contact your local distributor, if the items received in the box are not the same as the items listed above.
1-2
Optional accessories
1
Active speed sensor
5
Meter bracket
NOTE Some of the optional accessories may not be available in your area. Contact your local distributor to obtain more information.
2
Speed sensor X 1
M5 X 5L mm Hexagon
6
screw X 2
10
M5 washer X 2
2
Disc magnet screw
3
D6 X 5L mm magnet X 6
7
Meter bracket X 1
11
Mid-way connector X 4
L TYPE speed sensor
3
backet
FLASH LIGHT ON
PRESS THE PRESS THE
BUTTON BUTTON 3
ONCE SECONDS
M8 / S type speed
4
sensor bracket X 1
8
M5 X 12L screw X 2
4
Meter bracket