Operating Mode - Westfalia 85 33 24 Instruction Manual

Operating Mode

The pneumatic drill hammer is equipped with two toggle switches
(1) and (4). With these switches you can be set 3 different modes
of operation: Drilling only, Hammer Drilling and Chiselling only.
 For Hammer Drilling
Set the switch (1) to the drill and
hammer drill symbol
the switch (4) to the hammer drill
symbol
 For Chiselling
Set the switch (1) to the hammer
symbol
to the hammer drill symbol
 For Drilling
Set the switch (1) to the hammer
drill symbol
(4) to the drill symbol .
Hint:
This switch position does not have
any function
issue).
.
and set the switch (4)
and set the switch
(production-related
Operation
and set
.
17