Table of Contents
Advertisement
Auxiliary Handle
For your own safety, always use the auxiliary handle with the drill
hammer.
It is attached to the cylindrical part on the front of the housing and
can be attached in various positions. Make sure it is securely
attached.
Depth Gauge
1. To attach the depth gauge
(a), loosen the auxiliary
handle.
2. Insert the depth gauge
into the mounting hole.
3. Adjust the desired depth
and retighten the auxiliary
handle.
ON/OFF Switch
1. To switch on the machine, press the ON/OFF switch.
2. To switch off the machine, release the ON/OFF switch.
Dust Protection Cap
Attach the dust protection cap in order to
make sure that dust, dirt and sand cannot
get inside the tool chuck.
Especially when drilling overhead attach the
dust protection cap.
Operation
16
7
a
Advertisement
Table of Contents
