Table of Contents
Advertisement
Chapter 3. Software/Driver Installation
5. Finally, unmount the ISO image:
[root@host~]# cd
[root@host~]# umount /tmp/iso
3.3.
Firmware Update
The T5 and T4 firmwares are installed on the system, typically in
the driver will auto-load them if an update is required.
The firmware version can be verified using ethtool:
[root@host~]# ethtool -i <iface>
Chelsio T5/T4 Network Driver For XenServer
/lib/firmware/cxgb4
, and
Page 13
Advertisement
Table of Contents
Need help?
Do you have a question about the T5 Series and is the answer not in the manual?