Advertisement
BATTERY INSTALLATION
6 AA (LR6) Alkaline batteries are included and installed in the vehicle.
included to be installed in the remote. Batteries included are for demonstration purposes only.
Replace batteries if vehicle runs slowly or vehicle does not respond well to remote. For longer life, use Alkaline
batteries. Dispose of batteries safely. If vehicle malfunctions, please turn the vehicle's power OFF and ON again.
This should reset your vehicle and let you resume normal operation.
VEHICLE
1. Unscrew the battery cover with a Phillips head
screwdriver (not included).
2. Remove batteries included
for demonstration purposes
and dispose of them safely.
3. Install 6 AA (LR6) Alkaline
batteries with polarity (+/-)
as shown inside the battery
compartment.
4. Replace battery cover and
tighten screws.
FEATURES
X O I
ON (I) / OFF (0)
1
BATTERY COVER
STEERING ADJUSTER -
3
Adjust, if necessary,
to keep vehicle
running straight
3
1
2
AA (R6) Carbon-zinc batteries are
REMOTE CONTROLLER
1. Unscrew the battery cover with a Phillips
head screwdriver (not included).
2
2
. Install
(included) with polarity (+/-) as shown
inside the battery compartment.
3. Replace battery cover and tighten screw.
4. For best performance, use alkaline
batteries.
NOTE: Once batteries are
installed, the remote will
always be "ON" and will work
the moment you use it.
A
B
2
AA (R6) Carbon-zinc batteries
F
G
C
E
FORWARD
A
REVERSE
B
LEFT
C
RIGHT
D
MISSILE LAUNCHER
E
NOS
F
WHEEL TOOL
G
D
Advertisement
