Advertisement
BATTERY INSTALLATION
2
Requires 4 AA (LR6) Alkaline batteries for the vehicle and 2 AA (LR6) Alkaline batteries for the transmitter. Replace batteries in the vehicle or transmitter
if vehicle begins to run slowly or does not respond. For longer life, use Alkaline batteries. Dispose of batteries safely.
VEHICLE
1. Unscrew the battery cover with a Phillips head screwdriver (not included).
2. Install 4 AA Alkaline batteries (not included) with polarity (+/-) as shown
inside the battery compartment.
3. Replace battery cover and tighten screw.
FEATURES
3
2
(1) ON (I) / OFF (0)
3
(2) BATTERY COVER
(3) STEERING ADJUSTER - Adjust,
if necessary, to keep vehicle
2
running straight
1
0
I
TRANSMITTER
1. Unscrew the battery cover with a Phillips head screwdriver
(not included).
2. Install 2 AA Alkaline batteries (not included) with polarity (+/-)
as shown inside the battery compartment.
3. Replace battery cover and tighten screw.
NOTE: Once batteries are installed, the transmitter will always be
"ON" and will work the moment you use it.
A
B
(A) FORWARD
(B) REVERSE
(C) LEFT
(D) RIGHT
C
D
Advertisement
