Basic Setup - X10 ActiveHome2 CM15A User Manual

Introduction
Thank you for purchasing the X10
ActiveHome2 USB Home Automation
Interface. The X10 ActiveHome2 software
you purchased, in conjunction with the
Interface, lets you control lights and
appliances around your home when used
with X10 Modules.
Important: Please download and install
the X10 ActiveHome2 software before
you plug in the Interface.
The X10 ActiveHome2 software you
purchased should be downloaded from the
link you received in our e-mail titled "New
Software Download Link." This manual
assumes that you have already connected
your lights and appliances to X10 modules,
following the instructions that came with the
modules.
2

Basic Setup

1. Download X10 Software. Click on the
software link in the e-mail you
received titled "New Software
Download Link." Before you
download the software, choose the
option to save the file, and save it onto
your desktop so you can more easily
access it later.
2. Disable or turn off your anti-virus
software before you install the
software as some anti-virus programs
interfere with the installation.
Remember to turn on your anti-virus
program when you finish these steps.
3. Install Software. Go to your desktop
and double click the installation
program you just downloaded. The
software installation process will
install the driver for your CM15A.
3