Before You Begin - Razor HOVERTRAX PRIZMA Owner's Manual

BEFORE YOU BEGIN

Remove contents from box. Remove the separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches or dents that may have occurred during shipping. Because the
Hovertrax Prizma was assembled and packed at the factory, there should not be any problems, even if the box has a
few scars or dents. Please keep this box in case you need to send the Hovertrax Prizma back for service or repairs. If
you use another box, Razor will not be responsible for any damage caused during shipping.
MAKE SURE POWER SWITCH IS TURNED "OFF" BEFORE CONDUCTING ANY MAINTENANCE PROCEDURES.
Estimated Set-Up Time
Allow up to 6 hours for initial charge (see page 6 for charging information).
Charger
Note: Charger design may
vary from one shown
Anti-Slip Foot Platforms
Rubber Tires
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
2.
Charger Port
1.
Battery/Power
Mode Indicator
LED Lights
4
DO NOT USE NON-RAZOR PARTS
WITH YOUR PRODUCT.
The Hovertrax Prizma has been
built to certain Razor design
specifications. The original
equipment supplied at the time of
sale was selected on the basis of
its compatibility with the frame and
all other parts. Certain aftermarket
components may not be compatible
and will void the warranty.
Product ID Locations:
(See locations to the left)
1. Frame (Underneath Product)
2. Charger
On/Off Button
3. UPC Side of Box (Not Shown)
Box Contents:
• Hovertrax Prizma
• Charger
LED Lights
• Owner's Manual
WARNING: