Choosing A Location - VeriFone Commander Hardware Installation Manual

Choosing a Location

Many sites place the Commander Site Controller under the counter or
in the back office.
The Commander Site Controller may be mounted on a wall or under a
counter using the brackets designed specifically for it. See the
optional Commander Site Controller Bracket Kit for complete
mounting instructions. When deciding where to place the
Commander Site Controller, make sure that the location meets the
following requirements:
Power: 120 Volts AC, 60 Hz, 3 Amps
■
Temperature:
■
– Operating: 32 to 104° F (0 to 40° C)
– Non-operating: -40 to 158° F (-40 to 70° C)
Humidity: 15 to 95% relative humidity at 40° C with no
■
condensation
Avoid locations with the following characteristics:
Warning: To reduce the risk of fire, do not place the Commander
Direct Sunlight
■
Moisture
■
Excessive dust
■
Electrical "noise" or devices that cause excessive voltage
■
variations, such as air conditioners, fans, or high frequency
security systems.
Site Controller near objects that produce excessive
heat.
Commander Site Controller Hardware Installation Guide 3