Page 3
Thank you for choosing 425 WORKING TABLE, from ORMESA s.r.l. The 425 WORKING TABLE combines style and ergonomics without compromising on safety. ORMESA recommends that you read this manual very carefully to fully understand its contents. In addition to helping you become familiar with 425 WORKING TABLE quickly, it also contains practical tips for making the best use of it safely and keeping it in good working order.
TABLE OF CONTENTS WARNINGS........................3 CE CONFORMITY DECLARATION ................. 5 GUARANTEE ........................6 HOW TO STORE AND TRANSPORT THE MEDICAL DEVICE ........6 LABELS AND PLATES ....................7 SOME EXAMPLES OF WHAT NOT TO DO WITH 425 ..........7 TECHNICAL SPECIFICATIONS ..................8 INITIAL PREPARATION ....................
- THE MANUAL REFLECTS THE TECHNICAL STATE OF THE PRODUCT AT THE TIME IT WAS SOLD. ORMESA s.r.l. reserves the right to make any changes to the product or manual suggested by experience, technical considerations or regulatory developments without any obligation to update its previous production and relevant manual.
Page 6
Any CHANGES in the product and the REPLACEMENT WITHOUT ORIGINAL PARTS OR COMPONENTS ARE NOT AUTHORIZED. REFER ONLY TO ORMESA, otherwise warranty and marking will be voided In case of DOUBT about the SAFETY of the product or DAMAGE to parts or components, you...
CONFORMITY DECLARATION ORMESA S.r.l. guarantees and declares, under its own exclusive responsibility, that the following medical device, technical aid for rehabilitation: 425 school & free time table which this declaration refers to, conforms with the general requirements provided in the...
GUARANTEE ORMESA and INNOVATION IN MOTION warrant the product for 2 years; in case of problems, contact the retailer where you purchased it. Always ask for original spare parts, otherwise the guarantee will decline ORMESA will not be liable for damage in the following cases: - use by an unsuitable person;...
LABELS AND PLATES Name of the model Series number Article number ® s.r.l. Via A. Da Sangallo, 1 06034 Foligno (PG) ITALY Tel. +39 074222927 Fax +39 074222637 M O D E L . P A R T N ° Max load MAX.
TECHNICAL SPECIFICATIONS - Varnished and chromium-plated frame; - washable top of the table. it has edge and hollow and it is adjustable in height and tilt; - the book and pen supports are given in order to use also the top of the table while it is inclined;...
425-2 0.231 425-3 0.369 425-4 0.396 REMOVING 425 WORKING TABLE FROM THE BOX ATTENTION! CUT WITHOUT PRESSING TOO HARD WITH THE BLADE SO AS NOT TO DAMAGE THE CONTENTS OF THE BOX With 425-3 e 425-4 With 425-2 Pag. 9/17...
HOW IT IS COMPOSED Book support Pen support Table Side hook for bag Frame WHAT 425 IS AND HOW TO USE IT The aim of the WORKING TABLE 425 is to let the user get a correct position on the top of the table in order to handle objects or read a book.
HEIGHT ADJUSTMENT of the top of the table WARNING!: - Before adjusting the table, remove any material that if tips over could damage or cause harm to people - Make any adjustments without the user 1. Loose the shown knob supporting the frame of the table with the other hand 2.
Page 14
3. Adjust the table to the desired height by using both hands. 4. tighten the shown knob supporting the frame of the table with the other hand. 5. tighten the other knob supporting the frame of the table with the other hand. Pag.
height adjustment indicator the possible noise during the height adjustment, is the sign "STOP" not a defect of the table indicates the but it is due to the presen- maximum height ce of springs inside the tubes, useful to cushion the descent of the tabletop TILT ADJUSTMENT of the top of the table Pag.
Fixing/taking the BOOK SUPPORT and the PEN SUPPORT out With 425-2 Fixing/taking the BOOK SUPPORT and the PEN SUPPORT out With 425-3 e 425-4 Pag. 14/17...
MAINTENANCE, CLEANING AND DISINFECTION REGULAR (OR PREVENTIVE) MAINTENANCE REGULAR MAINTENANCE MUST BE PERFORMED ONCE A MONTH. REGULAR MAINTENANCE IS REQUIRED TO KEEP THE PRODUCT WORKING PROPERLY AND SAFELY AND IS ESSENTIAL FOR KEEPING THE CE MARK. THE MANUFACTURER IS NOT LIABLE FOR THE PERFORMANCE OF THE PRODUCT UNLESS REGULAR MAINTENANCE IS PERFORMED (ATTACHMENT 1, DIRECTIVE 2007/47/CE).
Do NOT perform maintenance or replace parts or accessories when the user is sitting on the device Intensifie all checks in marine environments, clean more often, anoint the parts exposed to salt corrosion (such as chrome, bolts and screws) EXTRAORDINARY (OR CORRECTIVE) MAINTENANCE EXTRAORDINARY MAINTENANCE MEANS ANYTHING DONE TO THE PRODUCT THAT IS NOT MENTIONED ABOVE.
Prior to recycling or reassignment an already used Ormesa product, it is required that: a doctor or therapist verifies that the aid is appropriate and adequate to meet the dimensional, functional and postural needs of the new user, and if all its components are suitable / appropriate for him.
Page 20
201 Growth Parkway ANGOLA, IN 46703 P 1.260.665.2769 F 1.260.665.3047 Toll free number 800-327-0681 E-mail: iim@mobility-usa.com Authorized Dealer The technical Data and information given in this handbook are not binding. ORMESA reserves the right to carry out any necessary change without prior notice or replacements...