Page 3
If, after reading it, you still have questions, contact your retailer, who will be happy to help you, or call ORMESA directly at +39 0742 22927, send a fax to +39 0742 22637 or send an e-mail to: info@ormesa.com ORMESA TEAM Pag.
LABELS AND PLATES .................... 5 GUARANTEE ......................6 HOW TO STORE AND TRANSPORT THE MEDICAL DEVICE ......... 6 WHAT THE MULTIFUNCTION TABLE IS & WHAT IT IS FOR. INTENDED USE ..7 MULTIFUNCTION TABLE FEATURES..............8 TECHNICAL SPECIFICATIONS ................9 INITIAL PREPARATION ..................
- THE MANUAL REFLECTS THE TECHNICAL STATE OF THE PRODUCT AT THE TIME IT WAS SOLD. ORMESA s.r.l. reserves the right to make any changes to the product or manual suggested by experience, technical considerations or regulatory developments without any obligation to update its previous production and relevant manual.
Page 6
MULTIFUNCTION TABLE IS A MECHANICAL MEDICAL DEVICE: Perform REGULAR MAINTENANCE and CLEANING following the instructions shown in the "Maintenance" chapter on page 18-19-20-21 and HAVE THE DEVICE INSPECTED AT THE INTERVALS INDICATED to VERIFY that it is WORKING PROPERLY and in GOOD CONDITION,...
THE CE MARKING CERTIFIES THAT MULTIFUNCTION TABLE CONFORMS TO THE SAFETY REQUIREMENTS defined with the REGULATION (EU) 2017/745 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5 April 2017 applicable for MEDICAL DEVICE...
GUARANTEE ORMESA warrants the product for 2 years; in case of problems, contact the retailer where you purchased it. Always ask for original spare parts, otherwise the guarantee will decline ORMESA will not be liable for damage in the following cases: - use by an unsuitable person;...
WHAT THE MULTIFUNCTION TABLE IS & WHAT IT IS FOR. INTENDED USE The MULTIFUNCTION TABLE provides a large, ergonomic and functional tabletop for manual activities or reading, adaptable to the position chosen by the user (sitting, standing / vertical or prone) and it allows easy access not only to normal chairs, but even to more specific seating systems.
MULTIFUNCTION TABLE FEATURES Side edges Book rest Pen rest Table Levers for inclination of the table Bag hook Mechanism for adjustment of the height of the table Feet with non-slip material Frame Frame closing screw The base of the frame is wide to allow easy access to wheelchair / seat / baby...
- Book and pen rest: Particularly useful when the surface is inclined. - Hooks: Lateral hooks to hang a backpack or bag. - The Multifunction Table is available in three sizes: Small, Medium, Large User sizes USER HEIGHT (C):...
Page 12
Dimensions in cm and inches - weights in kg and pounds cm 54 (21,2”) cm 69 (25,1”) closed cm 84 (33”) cm 63 (24,8”) MULTIFUNCTION TABLE SMALL WEIGHT OF THE AID Kg 6,7 Lb 14,7 cm 61 (24”) cm 80 (31,4”) closed cm 104 (40,9”) cm 80 (31,4”)
INITIAL PREPARATION INFORMATION ABOUT THE PACKING VOLUME WEIGHT SIZES Small 0.181 10,1 Medium 0.244 12,5 large 0.244 13,5 VOLUME WEIGHT SIZES inches pounds inches inches inches Small 31,8 25,2 13,7 11045 22,2 Medium 49,6 34,6 14889 27,5 large 49,6 34,6 14889 29,7 REMOVING MULTIFUNCION TABLE FROM THE BOX...
HOW TO USE THE MULTIFUNCTION TABLE Height adjustment of the TABLE - Before adjusting the table, remove all material on top that might fall off and damage or harm someone. WARNING! - Adjustments must be made without the user in position.
Adjustment of the inclination of the TABLE Blocking lever Unblock the levers, right and left Blocking lever Block the levers, right and left Pag. 15/22...
MAINTENANCE The execution of all maintenance operations is necessary to maintain the correct functionality and safety of the device. 1. ORDINARY MAINTENANCE (monthly) 1.1 Make sure that all the FASTENING PARTS are in place and correctly tightened. The device does not require special lubrication. DO NOT LUBRICATE THE ADJUSTABLE ELEMENTS Intensify all checks in marine environments, clean more often, anoint the parts exposed to salt corrosion (such as chrome, bolts and screws).
(mentioned above). Extraordinary maintenance must be carried out by the Dealer who supplied the product or by another subject indicated by the Manufacturer or the Distributor of the ORMESA products in the country of destination. The interventions must be performed with ORIGINAL REPLACEMENTS PARTS of the...
CLEANING, DISINFECTION, SANITIZATION INFORMATION SANIFICATION is the complex of cleaning and / or disinfection procedures and operations The CLEANING is a physical and mechanical process (i.e., rubbing) with which a large part of potential pathogenic microorganisms (bacteria, fungus, or virus), further to the visible dirt, is removed from the surface.
PROCEDURE Activities Cadence Description Soak a sponge or a clean disposable 4.1 CLEANING daily or weekly cloth with neutral detergent previously and CLEANSING based on intensity of use and diluted in hot water (temp. max 40°) biological risk (patient with Clean the painted and chromed parts of particular sweating, the frame and the table top.
Prior to recycling or reassignment an already used Ormesa product, it is required that: a doctor or therapist verifies that the aid is appropriate and adequate to meet the dimensional, functional and postural needs of the new user, and if all its components are suitable / appropriate for him.
Page 28
SINCE 1980 Authorized Dealer The technical Data and information given in this handbook are not binding. ORMESA reserves the right to carry out any necessary change without prior notice or replacements...