Integral Time - Fuji Electric Micro-controller X Series Operation Manual

Integral time (Setting range: 0 to 3200 seconds)
[Description]
• can be set automatically by the auto-tuning operation.
• can also be set manually.
[Setting example] Changing the integral time from 240 seconds to 600 seconds
Display
1.
Press and hold the
2.
Press the
3.
Press the
The current setting (
4.
Press the
5.
Press the
controller will operate with
6.
If you want to display the operation status, press and hold the
key for three seconds.
SEL
will be displayed on the PV display.
key to display
key once.
SEL
) flashes on the SV display.
or keys to display
SEL key once.
• When is set to 0, the integral operation does not start.
• When is set to 0.0, this makes the setting of
tive.
Operating procedure
.
.
will stop flashing and will be registered for
being seconds.
. After that, the
key for two seconds.
SEL
ineffec-
25