Central Machinery 67690 Set Up And Operating Instructions Manual page 6

adjusted to limit projection from the
post. This will reduce the possibility
of the tool breaking or bending.
15. Avoid unintentional starting. Prepare
to begin work before turning on the
tool.
16. Do not reach across the Lathe while it
is running.
17. Industrial applications must follow
OSHA guidelines.
18. Do not use the Lathe if it is off-
balance, or the workpiece is not
properly centered.
19. Only feed workpiece into a cutting
tool against the direction of rotation.
The workpiece must always be
rotating toward you.
20. Do not leave the tool unattended
when it is plugged into an electrical
outlet. Turn off the tool, and unplug
it from its electrical outlet before
leaving.
21. This product is not a toy. Keep it out
of reach of children.
22. People with pacemakers should
consult their physician(s) before
use. Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference or
pacemaker failure. In addition,
people with pacemakers should:
• Avoid operating alone.
• Do not use with power switch locked
on.
• Properly maintain and inspect to
avoid electrical shock.
• Any power cord must be properly
grounded. Ground Fault Circuit
Interrupter (GFCI) should also be
SKU 67690 For technical questions, please call 1-800-444-3353.
implemented – it prevents sustained
electrical shock.
23. Some dust created by power
sanding, sawing, grinding, drilling,
and other construction activities,
contains chemicals known [to the
State of California] to cause cancer,
birth defects or other reproductive
harm. Some examples of these
chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and
cement or other masonry products
• Arsenic and chromium from
chemically treated lumber
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
designed to filter out microscopic
particles. (California Health & Safety
Code § 25249.5, et seq.)
24. The warnings, precautions,
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
Page 6