Advertisement
Quick Links
PROCOLOR LED-WALL Installation Manual
Model ：PROCOLOR LED-WALL Electric Lift Stand
For using this product properly and safely, please follow the contents of the Installation
Manual before installation.
It is suggested that this Electric Lift Stand applies to the 55-86 inch intelligent panel.
This stand can carry a maximum weight of 100KG.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BOXLIGHT ProColor LED Wall
Summary of Contents for BOXLIGHT ProColor LED Wall
- Page 1 PROCOLOR LED-WALL Installation Manual Model ：PROCOLOR LED-WALL Electric Lift Stand For using this product properly and safely, please follow the contents of the Installation Manual before installation. It is suggested that this Electric Lift Stand applies to the 55-86 inch intelligent panel. This stand can carry a maximum weight of 100KG.
- Page 2 A - The Base 1pcs B- Lock wall bracket 1pcs C- Lifting Column 1pcs D- Wall Mount 1pcs H-Hanging Bar 2pcs J- AC power cable I -Control Pad 1pcs 1pcs L- AC Power Transfer Cable K- USB Cable 1pcs 1pcs...
-
Page 3: Other Accessories
Other Accessories Hexagon socket head screw Cross recessed pocket hex head screw Cross recessed pocket hex head screw Plastic bolt cover Allen key Cross recessed pocket hex head screw Expanded rubber stopper Wall lock screw Lock wall gasket Lock floor expansion bolt with nut Phillips screwdriver (self-provided) - Page 4 Step 1: Install the Lock Wall Bracket A. Operation of Drilling Wood wall Common wall specifications Min. Wood Stud Size: <16mm (5/8") nominal 4"(102mm) Max. actual 3 1/2"(89mm) 16"(406mm) Min. Wood Stud Size: nominal 2"(51mm) actual 1 1/2"(38mm) Centre line 2.5"(64mm) 6 5 8 m m 7/32"...
- Page 5 B.Operation of Drilling Concrete Wall M i n . 8 " ( 2 0 3 m m ) DANGER 2.5"(64mm) Drill 6 5 8 m m 3/8" (10mm) Hummer Concrete Wall Anchor...
- Page 6 Step 2 : Fix The Base 1.Disassemble the Base 2.Positioning line 3.Drilling Diameter= 1 0 m m Depth= 6 0 m m 7 7 . 5 m m 3 2 0 m m 2 2 0 m m 4.Fix the base with expansion studs and nuts 5.Reassemble the base...
- Page 7 Attention: When drilling, it is necessary to ensure that the position of the center of the lock wall bracket and the base hole are the same. A Centreline B Centreline Attention: The size of the floor line should be based on the wall surface.
- Page 8 Step 3: Place the column in the base and the lock wall bracket, and lock the corresponding bolt. Step 4: Place the column in the base and the lock wall bracket, and lock the corresponding bolt...
- Page 9 Step 5: When using the stand, connect the hand controller and the appropriate power cord to the stand and connect the power supply. Step 6: Please select the appropriate screw ( 2 or 7 ) to assemble the whole machine and the wall hanging strip E according to the actual machine requirements.
- Page 10 Step 7: Hang the whole machine through the wallmount to the stand and lock with safety screws. Step 8: Plug in the AC Power Transfer Cable and USB adapter cable to interact with the whole machine.
- Page 11 Refer to the following figure after assemble.
Need help?
Do you have a question about the ProColor LED Wall and is the answer not in the manual?
Questions and answers