Main Features - Korg Nu:Tekt OD-S Owner's Manual

Thank you for purchasing the Nu:Tekt OD-S NUTUBE OVERDRIVE KIT.
To help you get the most out of your new instrument, please read this
manual carefully.

Main features

• The Nu:Tekt OD-S is a kit used to assemble effectors that use the Nutube.
• Use the Nutube on the OD-S to get an authentic tube overdrive sound.
• This kit includes a TUBE GAIN knob, which allows you to easily change
the distortion waveform.
• Use the internal dipswitch to switch between a full-range overdrive with a
full low end and a sparkling high end, and a midrange overdrive sound
with plenty of bite, on which the low and high end frequencies are cut off
at just the right amount.
• The operational amplifier uses an IC socket, and thus can be easily
replaced.
• A machined aluminum die-cast case is included.
• If you are concerned about whether you can assemble this kit or whether
you might make a mistake, refer to the video explanations available on
the Web (nutekt.org), or use our assembly service support (chargeable).
About Nutube
Nutube is a new vacuum tube developed by KORG INC. and Noritake Itron
Corporation and that utilizes technology from vacuum fluorescent displays.
As with conventional vacuum tubes, the Nutube is constructed with an
anode, grid and filament, and operates as a complete triode tube.
Furthermore, it generates the response and same rich harmonic character-
istics of conventional vacuum tubes.
If a strong impact is applied to this unit, noise at the high-frequency
range may be output. This is due to the structure of the Nutube; it is
not a malfunction.
- 2 -