Lakes Bathrooms COASTLINE Series Installation & Maintenance Instructions Manual page 4

SIZE Adjustment A
700 (070) 670—700mm
750 (075) 720—750mm
800 (080) 770—800mm
900 (090) 870—900mm
1000 (100) 970—1000mm
Coastline
Shower
Door
Lakes Coastline Side Panel is fully reversible, for use in conjunction with Coastline shower doors.
Ensure tray is correctly levelled & that all tray/wall joints are sealed &
cured over entire length of tray sides (See
DO NOT SEAL BASE / WALL EDGES UPTO A FITTED ENCLOSURE !
AFFIX WALL PROFILES
A
Wall profile orientation : Screw flanges to inside of enclosure. Measure, plumb & mark wall
profile positions, drill, plug & affix both wall profiles.
Wall Profile
Tools Required
Position 'X'
685mm
735mm
785mm
Tape Measure
885mm
985mm
Pencil
Spirit Level (with vertical 'bubble')
Pozidriv Screwdriver
Power drill &
8mm masonry bit
3mm HSS
drill bit
Fig A) prior to fitting enclosure.
Good quality silicone
sealant & applicator