Archos Helium Series Manual

How to reinitialize my ARCHOS 101 Helium ?
This process is recommended for your device if : it is frozen, it
doesn't turn on or you are experiencing a software issue. It will allow you
to perform a low level format on your device. Thus all the data will be
deleted, you won't be able to retrieve them. We strongly recommend to
back them up first. Keep in mind that your device's battery must be
charged enough to perform this operation.
1. If you can have access to the Android™ interface
a. Select the Settings app then select Backup & reset > Factory data
reset
b. Select "Reset tablet" and confirm
2. If you can't access the Android™ interface
a. Turn off the device by using ON/OFF (push the reset button if
available or the power button for 10 secs)
b. While holding Volume + press ON/OFF until the device turns on
c. On the select boot mode screen, select "Recovery mode" using the
volume buttons and confirm with ON/OFF
d. Wait a few seconds until the recovery menu is displayed
Use the volume buttons to navigate and ON/OFF to validate.
If you failed to access to the recovery
menu, please start again from the
beginning.
a. Select "Wipe data/factory reset" and validate to restore your device
URL: http://faq.archos.com//index.php?action=artikel&cat=49&id=379&artlang=en
Helium Series
Page 1 / 2
(c) 2020 ARCHOS <noreply@archos.com> | 2020-07-31 23:09