ViewSonic VS13647 User Manual page 44

About AP and Infrastructure modes
In AP mode, you need to use your computer's wireless connection utility to search for
the projector's SSID and connect to it. Then you can search for the projector with
vsPresenter.
In Infrastructure mode, you should connect both your computer and projector to the
same AP router and make connections with the IP address.
The following diagram describes how to access the Internet in AP and Infrastructure
modes.
(AP mode)
Important
If you need more information about AP and Infrastructure modes, please
refer to user documentations for Wireless Routers which are usually
available on 3C stores.
ViewSonic Pro8400
Internet
(Infrastructure mode)
Internet
40