Web User Interface; Source - Datavideo HS-1600T MKII Instruction Manual

6.2 Web User Interface

By now, we have obtained the IP addresses of the PC and the NVS-31 MARK II. Enter the NVS-31
MARK II's IP address into the address bar of a browser then hit the ENTER button. Login by entering
the user name as well as the password into a pop-up dialogue box as shown below.

Source

You will see the Source page immediately after logging into the NVS-31 MARK II web UI. On the
Source page, you will see Input Information, Video Source, Audio Source, Resolution, Frame Rate,
Channels, Bits Per Sample and Sample Frequency.
Note: The NVS-31 MARK II web UI does not update automatically so to learn the latest device status,
please refresh the page manually.
While monitoring streaming and recording, please update the page periodically regardless of how you
operate the device (using the device's physical buttons only or using the device's physical buttons
along with the web UI). This ensures the page is always displaying the most up-to-date information.
Username: admin
Password: 000000
Click OK to login. Once logged in, the first
page that appears will be the Source page.
45