Alaterre Furniture Tahiti Vanity Installation Instructions

Table of Contents

Download this manual

Thank you for purchasing a Bath Vanity from Alaterre Furniture. Installation of this product

requires a Level, drill & screwdriver. It is helpful to have a second person present when

installing your vanity.

Step 1

Read through these instructions thoroughly before beginning installation.

NOTE: Although the average consumer can install this product, we recommend you consult

with a trade professional if you have any questions or concerns.

4/12/17

Alaterre Furniture

Tahiti Vanity

Vanity Installation Instructions

NO.

DRAWING

PARTS

DESCRIPTION Q'TY

VANITY CASE

WOOD SCREW

LEVELER

KNOB

1 of 3

Tahiti

Table of Contents

Do you have a question about the Tahiti Vanity and is the answer not in the manual?

Page 1 Alaterre Furniture Tahiti Vanity Thank you for purchasing a Bath Vanity from Alaterre Furniture. Installation of this product requires a Level, drill & screwdriver. It is helpful to have a second person present when installing your vanity. Vanity Installation Instructions...
Page 2 Step 2 Remove Vanity and hardware from packing material. Step 3 Place Vanity in the desired location. Using the levelers in the feet, make sure the Vanity is level and plumb to the wall. Step 4 Locate the studs in the wall behind the Vanity. Mark the location of the Studs in the wall on the stretcher rail.
Page 3 Step 6 Attach Konbs (D) Using Screw (E) to Doors. CARE Clean with mild soap and wipe dry. REPLACEMENT PARTS Please do not contact the company you purchased from as we can help you faster. Order replacement parts and hardware at "alaterrefurniture.com" 4/12/17 3 of 3 Tahiti...