Memory Settings - Biomark HPR LITE READER User Manual

3.2 Memory Settings

Pressing the
menu.
This menu allows you to access information within the reader's memory.
Parameters that can be adjusted are:
View tags - Displays the tag IDs currently stored in the reader's memory from newest to
•
oldest. The numbers in the parenthesis tell you which tag ID you are currently viewing
out of the total number of tag IDs stored.
Storage mode - Changes which detected tag IDs are stored in the memory. There are 3
•
possible options:
o Disabled - Disables the HPR Lite's memory. Detected tag IDs will not be stored
in the memory but will still be transmitted via USB and Bluetooth connections.
When disabled, the counter on the main screen is replaced with an 'OFF'
indication.
o On All - All detected tag IDs will be stored in the memory and transmitted via
USB and Bluetooth connections. The memory counter on the main screen will
increase after each detection.
o On Unique - A tag ID is stored and transmitted via USB and Bluetooth
connections only once when it is detected several times in a row. If another tag is
detected after the first tag, and the first tag is detected again, it will be read and
stored again. If the reader is powered off and on, the tag ID can be stored and
transmitted again. On Unique is the default Memory setting. See examples on
the following page.
HPR Lite User Manual
(Right) key while in the Main Menu Screen will display the Memory settings
12