ViewSonic PRO8450W VS13646 User Manual page 54

projector. That password should be kept and used next when you try to
connect to the same projector.
If there are multiple computers connected to the projector, you can decide a
display zone by clicking 1, 2, 3, 4, L, R, All, or Background.
2. If you want to freeze the projected image on the screen, press
movements will be not been seen on the screen until
3. You can choose a capture mode from here.
i. To display a full screen, click FullScreen.
ii. To display a partial screen, click FixedSize. A square appears on your
screen. You can place it where you want to project.
iii. If you wish to change the square, click Alterable.
4. The Basic Setting page allows you to configure vsPresenter.
ViewSonic Pro8450w
. Any further
is pressed.
50