For Your Safety - HAZET-WERK 4954-2 Operating Instructions Manual

1. Owner's liability
• This tool was developed and manufactured
according to the technical norms and stand­
ards valid at the time and is considered to
be operationally reliable. Nevertheless, the
tool may present a danger when it is not
used as intended or used in an inappropri­
ate way by non­qualified personnel. Please
make sure that any person using this tool
or carrying out maintenance work carefully
reads and fully understands these operating
instructions before using the tool.
• Modifications of any kind or any additions
or modifications to the tool are prohibited.
• All safety instructions, warning and opera­
tion notices on the tool must be kept legible
at all times. All damaged labels or stickers
must be replaced immediately.
• All specified installation values or setting
ranges must be observed.
• Keep the operating instructions together
with the tool at all times.
• The tool may only be used if it is in good
working order.
• All safety equipment must always be within
reach and should be checked regularly.
14
2

For your safety

Electrical energy may cause serious injuries!
Always wear personal protective equipment!
hazet.com •
^
2. Intended use
Operational reliability is only guaranteed if
the device is used as intended in accordance
with the information provided in the operat­
ing instructions. In addition to the occupa­
tional health and safety information in these
operating instructions, the regulations for
general safety, the prevention of accidents
and for environmental protection valid for this
tool's application range must be observed and
respected.
Use and maintenance of the tool must always
comply with relevant local and national regula­
tions.
• The brake fluid tester measures the boiling
point of the brake fluid in order to deter­
mine the degree of contamination / water
content.
• To avoid hazards, do not use the tester with
other liquids such as petrol, diesel or other
flammable liquids.
• The tool must only be used if it is in good
working condition.
• All safety equipment must always be within
reach and should be checked regularly.
• Any incorrect use of the HAZET tool or use
that fails to comply with the safety instruc­
tions can result in serious injury or even
death.
• Any deviation from the intended use and/or
any misapplication of the tool is not allowed
and will be considered as improper use.
• Any claims against the manufacturer and/
or its authorised agents because of dam­
age caused by improper use of the tool
are void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the operator.
info@hazet.de
]