For Your Information - HAZET-WERK 4954-2 Operating Instructions Manual

1. General information
• Please make sure that the user of this tool
carefully reads these operating instructions
and fully understands all the information
provided before using the tool for the first
time.
• These operating instructions contain import­
ant advice that is necessary for the safe and
trouble­free operation of your HAZET tool.
• For intended use of the tool, it is essential
that all safety and other information in these
operating instructions is adhered to.
• For this reason, always keep these operat­
ing instructions together with your HAZET
tool.
• This tool has been designed exclusively for
specific applications. HAZET emphasises
that any modification to the tool and/or use
in a way that does not correspond to its
intended application is strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damage to property originating
from improper or inappropriate applica­
tion, misuse of the tool or a disregard of the
safety instructions.
• Furthermore, the general safety regulations
and regulations for the prevention of acci­
dents in the application range of this tool
must be observed and respected.
[ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de
1

For your information

Electrical energy may cause serious injuries!
Always wear personal protective equipment!
2. Explanation of symbols
ATTENTION: Pay strict attention
to these symbols!
Read the operating instructions!
The owner of this tool is obliged to
observe the operating instructions
and instruct any users of this tool
according to the operating instruc­
tions.
NOTE!
This symbol indicates advice that is
helpful when using the tool.
WARNING!
This symbol marks important speci­
fications, dangerous conditions,
safety risks and safety advice.
CAUTION!
This symbol indicates advice which,
if disregarded, results in damage,
malfunction and/or functional failure
of the tool.
QUALIFIED PERSONNEL!
The tool may only be used by quali­
fied personnel. Handling by non­
qualified people may lead to injuries
to persons or damage to the tool or
workpiece.
13