Advertisement
STEP 7 :
Mount TV onto In-Wall TV Mount
At least 2 people are required to install
the In-Wall TV Mount. To avoid possible
injury or damage, DO NOT attempt to
mount the TV alone.
e
Using 2
people,
lift TV (with VESA Plate
attached from previous step) and
angle the TV bottom away from the
Bracket
Arm.
Carefully line up the
VESA Plate U-Tabs with the notches on
top of Bracket Arm (fig. 1 ), and set the
VESA Plate U-Tabs up and over the
corresponding notches on the Bracket
Arm (fig. 2). Slowly pivot TV bottom
towards the In-Wall Mount until
U-Tabs are resting in
notches,
and
VESA Plate is flush with Bracket
Arm.
While maintaining grip on TV, carefully
test to ensure In-Wall TV Mount is
supporting
TV.
Do not reposition TV
until Step 8 (below) is completed.
STEP 8 :
Secure TV to Bracket Arm
•
While still using 2 people, one person
should continue to maintain support of TV
while other person tightens lock-down
screw located on bottom of Bracket Arm,
as shown. Make certain all components of
the In-Wall TV Mount are secure before
releasing grip on TV.
,-u-Tab
:'\
~
,~A<m
fig. 7
-
fig.2
T elevision having
maximum 60 inch
diagonal
screen
weighing
up
to 75 pounds .
.&,_
CAUTION: "This
wall
mount is intended for use
only with the maximum weights indicated
.
Use
with
products
heavier than the maximum weights indicated may resu lt in
collapse of the mount and its accessories causing possible
injury."
Page 5
"
I
I
Bracket
Arm
Advertisement
