Remote Control - ViewSonic PJD6381 User Manual

Remote Control

POWER
1
Turn the projector on or off.
VGA1
2
Select analog RGB signal from
COMPUTER IN 1 terminal.
Source
3
Manually select an input source.
Enter
4
Confirmed selections.
Keystone+ / -
5
Adjust image distortion caused by
tilting the projector.
ViewM
6
Switch in between high brightness
performance or Accuracy color
performance.
Freeze
7
Press "Freeze" to pause the screen
image. Press again to cancel the
freeze function.
Mouse
8
Switch between OSD control and
Mouse control (Apply to Navigation
buttons, Enter/Mouse Left Click, and
Exit/Mouse Right Click buttons).
Laser
9
Aim the remote at the viewing
screen, press and hold this button to
activate the laser pointer.
VGA2
10
Select analog RGB signal from
COMPUTER IN 2 terminal.
Video
11
Select video signal from video
equipment.
Auto
12
Resynchronize the projector to the
input signal from a computer. This
function is available for computer
mode only.
MENU
13
Display on-screen display menus.
Four directional buttons
14
Use four directional buttons to select items
or make adjustment to your selection.
Exit
15
Exit OSD Menu.
Magnify
16
Zoom in and out the images.
Volume + / -
17
Adjust the volume level.
Mute
18
Cut off the sound temporarily. Press again
to cancel the Mute function.
Light
19
Enable backlit functions of the remote
control's buttons.
Blank
20
Cut off the screen temporarily. Press again
to cancel the Blank Screen function.
EN-11