ViewSonic PJD6251 User Manual page 26

OSD Timeout
Duration of OSD menu display countly starts (at idle state by second).
Option (Computer / Video Mode)
Blank Screen
Blank the screen temporarily, and select the screen color when this function is active.
Password
Set or change the password. When the password function is added, image projection will
require to input the preset password when turning on the projector.
Screen Capture
Capture the current projection screen as a start-up screen.
Start-up Screen
Select start-up screen when the projector is powered on or when no signal is input.
"User" is the screen that you captured.
Zoom
Zoom in and out the images.
Text shot
Using command codes, text messages can be sent for display by the projector over a
network connection. Text is shown on the center of the projection screen. This is a great way
to display urgent alert messages to employees, and simply requires a connection to the
projector's LAN connector.
DCR (Dynamic Contrast Ratio)
Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable DCR
will resume to normal contrast performance. DCR will impact lamp life and system noise
performance.
Closed Caption
Enable or Disable closed captions by selecting CC1 (closed caption1, the most common
channel), CC2, CC3, CC4, T1, T2 or OFF.
™
Brilliant Color
Produce an expanded on-screen color spectrum that delivers enhanced color saturation for
bright, true-to-life images. Suggesting to turn Off for most video sources and On for most
computer sources.
NetWork
Enable or disable network management via RJ45 connector.
Network Config (Computer / Video Mode)
DHCP
Abbreviation for Dynamic Host Configuration Protocol. This protocol automatically assigns
IP Address to networked devices.
When the "DHCP" sets to "Yes", it takes some time to obtain IP address from DHCP
server.
EN-23