Advertisement
Replacing the ARF
Before replacing the ARF
Press the POWER button for at least 0.5 seconds or press the POWER
●
button twice to turn off the projector.
Wait until the cooling fan stops and the POWER indicator turn to RED.
●
Disconnect the mains plug from the mains socket.
●
Prepare a Phillips-head screw driver.
●
Replacement procedure
1 . Turn the projector upside down and place it gently on a soft cloth.
2. Use a Phillips-head screwdriver to loosen 3 ARF cover fixing screws until
the screws turn freely and remove the ARF cover.
3. Use a Phillips-head screwdriver to loosen an ARF fixing screws and
release the clamp, then slightly slide up the used ARF to remove.
ARF fixing screw
Grip
* When you replace the ARF unit, clean the compartment and/or the Air
exaust port if you need to.
2-E
NGLISH
ARF cover fixing screw
Soft cloth
Clamp
ARF cover
ARF
Advertisement
