Advertisement
AXIS S3008 Recorder
Get started
Get started
The AXIS S3008 Recorder is used with the AXIS Companion video management software.
Get started with AXIS Companion
Note
Internet access is required during the system setup.
Installation overview:
1. Register a MyAxis account on page 3
2. Install the hardware on page 3
3. Install the desktop app on page 4
4. Create a site on page 4
5. Install the mobile app on page 5
Result of system installation:
•
The firmware is upgraded on all Axis devices.
•
A password is set for the devices.
•
The recordings are enabled with default settings.
•
The remote access is enabled.
Register a MyAxis account
Register a MyAxis account at axis.com/my-axis/login
Install the hardware
1. Install your camera hardware.
2. Connect the recorder to your network via the LAN port.
Note
If you have no recorder, then you need a camera with an SD card if you want to be able to record video.
3. Connect the cameras to the recorder's integrated PoE switch or an external PoE switch.
To watch this video, go to the web version of this document.
www.axis.com/products/online-manual/63362
3
Advertisement
