Remote Control
POWER
1
Turn the projector on or off.
Four directional buttons
2
Use four directional buttons to
select items or make adjustments
to your selection.
MENU
3
Display or exit the on-screen display
menus.
Enter
4
Confirmed selections.
Exit
5
Exit OSD Menu.
Keystone+ / -
6
Adjust image distortion caused by
tilting the projector.
Magnify
7
Zoom in and out the images.
Source
8
Manually select an input source.
Auto
9
Resynchronize the projector to the
input signal from a computer. This
function is available for
mode only.
Mouse
10
Switch between OSD control and
Mouse control (Apply to
Navigation buttons, Enter/Mouse
Left Click, and Exit/Mouse Right
Click buttons).
ViewM
11
Switch in between high brightness
performance or Accuracy color
performance.
Freeze
12
Press "Freeze" to pause the screen image.
Press again to cancel the freeze function.
Mute
13
Cut off the sound temporarily. Press again
to cancel the Mute function.
Blank
14
Cut off the screen temporarily. Press
again to cancel the Blank Screen
computer
function.
Volume + / -
15
Adjust the volume level.
EN-11