ViewSonic PJ766D-1 User Manual page 4

General Safety Information
Do not open the unit case. Aside from the projection lamp, there are no user-serviceable
parts in the unit. For servicing, contact qualified service personnel.
Follow all warnings and cautions in this manual and on the unit case.
The projection lamp is extremely bright by design. To avoid damage to eyes, do not look
into the lens when the lamp is on.
Do not place the unit on an unstable surface, cart, or stand.
Avoid using the system near water, in direct sunlight, or near a heating device.
Do not place heavy objects such as books or bags on the unit.
Power Safety
Only use the supplied power cord.
Do not place anything on the power cord. Place the power cord where it will not be in the
way of foot traffic.
Remove the batteries from the remote control when storing or not in use for a prolonged
period.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly.
Unplug the power cord.
Allow the lamp sufficient time to cool.
Cleaning the Projector
Unplug the power cord before cleaning.
Allow the lamp sufficient time to cool.
About this manual
This manual is intended for end users and describes how to install and operate the DLP
projector. Wherever possible, relevant information—such as an illustration and its
description—has been kept on one page. This printer-friendly format is both for your
convenience and to help save paper and thereby protect the environment. It is suggested
that you only print sections that are relevant to your needs.
ViewSonic PJ766D iii