ViewSonic PJ656 User Manual page 51

Regarding the indicator lamps (continued)
POWER LAMP
indicator indicator
Blinking
In Red
Turned
or
off
Lighting
In Red
Blinking
In Red
Turned
or
off
Lighting
In Red
Lighting Simultaneous
In Green blinking in
NOTE • When the interior portion has become overheated, for safety
purposes, the power source is automatically turned off, and the indicator lamps
may also be turned off. In such a case, press the "" (OFF) side of the power
switch, and wait at least 45 minutes. After the projector has sufficiently cooled
down, please make confirmation of the attachment state of the lamp and lamp
cover, and then turn the power on again.
ViewSonic
TEMP
indicator
The cooling fan is not operating.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
sufficiently cooled down, please confirm that no foreign
Blinking
In Red matter has become caught in the fan, etc., and then
turn the power on again.
If the same indication is displayed after the remedy,
please contact your dealer or service company.
There is a possibility that the interior portion
has become heated.
Please turn the power off, and allow the projector to
cool down at least 20 minutes. After the projector has
sufficiently cooled down, please confirm the following
Lighting items, and then turn the power on again.
Red
In • Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy,
please set FAN SPEED of the SERVICE item in the
OPTION menu to HIGH.
It is time to clean the air filter.
Please immediately turn the power off, and clean or
change the air filter referring to the section "Air Filter".
Red After cleaning or changing the air filter, please be sure
to reset the filter timer. After the remedy, reset the
power to ON.
PJ656
Troubleshooting
Description
47