IMPORTANT INFORMATION iReliev Conductive Back Wrap is particularly safe and user- ™ friendly. When the Wrap is fastened and the electrode pads are in contact with the skin, the intensity of the iReliev TENS device may ™ be adjusted. iReliev Conductive Back Wrap ™...
Page 3
The iReliev CONDUCTIVE BACK WRAP has been designed for people who ™ suffer from muscular tension and pain in their back. It provides a natural drug free alternative that treats back pain the natural way with no side effects. Your iReliev CONDUCTIVE BACK WRAP is an accessory to your Transcutaneous ™...
Protect the device from moisture. If liquid should get into the device, remove the battery immediately and discontinue use. Should this happen, contact iReliev at 1-406-672-6066. ™ Never use the device in rooms where aerosols (sprays) are used or medical grade oxygen is being administered.
Page 5
A tendency toward internal bleeding Pregnant women Therapy with the iReliev CONDUCTIVE BACK WRAP is a natural way of fighting ™ pain; however it does not replace medical diagnosis or treatment. If you are not sure, consult your doctor before using this device.
Package Contents Before using this accessory, make sure that you have all components. The iReliev Conductive Back Wrap includes: ™ 1 Conductive Back Wrap 1 Instruction/ User Manual The packaging can be reused or recycled. Please dispose of properly if no longer required.
Parts Diagram Description: 1.) Integrated Connection Cables 2.) Conductive Silicone Pads 3.) iReliev Conductive Back Wrap ™ 4.) Hook and Loop Closure...
Page 8
Conductive Back Wrap ™ 1.) Before putting on the Conductive Back Wrap, remove any residue on skin, cream or ointment. Make sure that your skin is clean and free of oil. Do not place the wrap on injured or inflamed areas of the skin, such as wounds, sores, rashes or reddening.
Page 9
4. If your back pain is in the lower treatment area, position the wrap so that the middle of the wrap sits approximately 1 to 2 inches below the waist. 5. When the wrap has been placed into the correct position, bring the two ends of the neoprene straps together and fasten with the built-in hook and loop pads.
Always check the unit and accessories before use to prevent damage and defects; these are some of the simple checks: 1.) Make sure the battery on the iReliev™ TENS Device has sufficient charge and is corroded. 2.) Make sure the cables fit tightly into the connection sockets of the device. The table below shows some common defects.
Do not pull on the lead wire cables but on the connectors attached to the ends of the cables. To ensure the quality and longevity of your Conductive Back Wrap, please store and fold as per images. Folding the back portion on itself can over time compromise the lead wire cables.
Warranty ™ This iReliev Conductive Back Wrap carries a one-year warranty from the date of purchase. The warranty applies to the iReliev Conductive Back Wrap, necessary parts and ™ labor relating thereto. ExcelHealth or distributor reserves the right to replace or repair the device at it’s discretion.
Need help?
Do you have a question about the Conductive Back Wrap and is the answer not in the manual?
Questions and answers