Fujitsu Lifebook U729 User Manual page 40

USB TYPE-C
Setting Up
Port Replicator
C A U T I O N
Select a suitable location for the Port
Replicator before setting it up.
Follow the instructions below when
doing so:
Never please the Port Replicator on a
soft surface (e.g. carpeting, upholstered
furniture, bed). This can block the air vents
of the notebook and cause overheating
and damage.
Place the Port Replicator on a stable,
flat and non-slip surface. Please note
that the Port Replicator's rubber feet
may mark certain types of surface.
Never place the Port Replicator to
extreme environmental conditions.
Protect the port Replicator from dust,
humidity and heat.
30
TM
Connecting the Mains Adapter to
the Port Replicator
1. Connect the power cable to the mains
adapter (1).
2. Plug the power cable into the mains
sockets (2).
3. Connect the mains adapter cable to the
DC-in of the Port Replicator (3).
3
1
2