Bachmann 38 Ton Two-Truck Shay Assembly page 13

Instructions For Mounting Power Trucks Item #88999 To New LS Shay
1. Remove screws"C" to change power trucks for the Shay
2. When necessary, remove screw"D" to change top plate
& contacts assembly
Note: For new Shay, you need to remove the "old Shay contact
plate PCB" from the top plate, and fit the "4 points
contact plate assembly"(in acc. bag) to the top plate.
BACHMANN INDUSTRIES, INC.
1400 East Erie Avenue
Philadelphia, Pennsylvania 19124 USA
800-356-3910
www.bachmanntrains.com
Printed in China
PCB UNDER BOLSTER
(IN ACCESSORY BAG)
CONTACT
CONTACT
TO MOTOR
TO TRACK
CONTACT
CONTACT
TO TRACK
TO MOTOR
SCREW & WASHERS "D"
(IN ACCESSORY BAG)
SCREW "C"
1
OLD SHAY CONTACT
PLATE PCB
CONTACT
REMOVE
TO MOTOR
CONTACT
4 points contact plate
TO TRACK
assembly for new Shay
(IN ACC. BAG)
2
PCB UNDER BOLSTER
(IN ACCESSORY BAG)
OLD SHAY CONTACT
PLATE PCB
REMOVE
CONTACT
TO TRACK
4 points contact plate
assembly for new Shay
CONTACT
(IN ACC. BAG)
TO MOTOR
SCREW & WASHERS "D"
2
(IN ACCESSORY BAG)
SCREW "C"
1
G821X-IS008